Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!



Giant Scale R/C news, forums, classifieds, event coverage, and more!

gary mxs.jpg
by Santi8 : Aug 24, 2012 at 12:42 AM
For this project, the plane has a very simple theme... let me know if you guys figure it out!
We ran with the same theme as the website logo and turned that taxi cab scheme into a custom 3d monster!
by Santi8 : Aug 24, 2012 at 12:36 AM
When Gyro and I first spoke about 3drcf, I had just began gathering my equipment for my vinyl project. He had mentioned the site and I asked about a logo. After an evening of adjustments and color arrangements, we finally ended up with what you all see above! 3drcforumslogo.jpg
Custom Form.jpg
by Santi8 : Aug 24, 2012 at 12:11 AM
s8 Graphix Custom Vinyl Shop Alright 3d peers, first let me introduce myself. My name is Josh, friends and colleagues call me Santi. I'm originally from Chicago, but currently reside in Nashville, TN. I've decided to combine my background in graphic design and combine it with my obsession for 3dRC! I will...
by Olie : Aug 23, 2012 at 9:37 PM
Lets get this ball rolling!

Ola for Australia!

I like what you have done with the place Gyro.

Spotted this link on RCG, followed it, joined, suggested it to others.
by weaser42 : Aug 23, 2012 at 7:18 PM
Now available for Preorder... I've got mine ordered up (a red one)

42" Vyper Bype

The new Vyper Bype was designed by Scott Stoops as a maximum-performance 3D biplane. Compared to similar monoplanes, the Bype has a higher roll rate, higher pitch rate, and almost twice as much wing area. Not a 3D...
by gyro : Aug 23, 2012 at 4:45 PM
so... anybody have one? Heard it's a pretty neat plane...
by Cmala : Aug 23, 2012 at 4:08 PM
Thanks Gary for making this spot for me.

For those of you who don't know, I make custom engine/motor standoffs. Whenever you are setting up a new plane you have to get the motor placement just right to get your correct CG or just to get that perfect spinner gap. In the past, you would have to buy some...
by robj : Aug 23, 2012 at 2:47 PM
I'm going gas on this one. So far:

What servos, boards(smart-fly?), battery(s), etc. I figure if you are going to copy someone, might as well be a quality setup.

by gyro : Aug 23, 2012 at 1:50 PM
I'm pretty sure that I can guess the answer, but who out there likes the new logo better than the old one?