Scale Nelitz 1/3 scale Cub build

[TonyHallo]

Why mess around, make a pattern of the outline of your dash and drawing of what you want or a photo of the full scale you like and send it off to SAC. That's my 33% Champ dash on their site. Their dashes are about 3/16" thick so make your boot cowl after you get the dash. See how the aluminum overlaps the dash below. Tell them I sent you!
For the Champ I sent them a photo from the three view and they duplicated it.

 

[TonyHallo]

I had a fellow CNC these for the Champ and lost them before I installed them, was too embarrassed

to get him to do them again!

 

[TonyHallo]

You might check with Aerographics, they don't list a J3 Cub but I find it hard to believe they don't have one. Their catalog states call if you don't see. I need to call them tomorrow and I will ask. Sorry for the long wind here!.

 

[TonyHallo]

Sorry again, but you keep your dash you might want to add this little 1 mm screws around the gauges. It will go a long way to fill in the area.

 

[TonyHallo]

I promise last one tonight, from the Piper museum.

 

[dhal22]

Thank you Tony.

 

[dhal22]

You might check with Aerographics, they don't list a J3 Cub but I find it hard to believe they don't have one. Their catalog states call if you don't see. I need to call them tomorrow and I will ask. Sorry for the long wind here!.

Tony, did you call today? If not I will call Monday.

 

[TonyHallo]

I did and he looked but couldn't find any J3 info which really surprised me,

 

[dhal22]

Little things are everywhere. Added better red paint to these guys.

 

[dhal22]

Lots of glass done now. I will leave door side off while I work inside.