• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Recent content by grumman-cats

  1. grumman-cats

    Post your favorite full scale photo's.

    Hopefully what my kingair will look like whenever i get aound to working on it again
  2. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    Honestly, if i were to do it again i would build it from wood. The glass fuse is nice and has all the panel lines but i find it easier to deal with wood.
  3. grumman-cats

    Scale Beech KingAir 200. RC12-H

    Just purchased some balsa. Had to refinance my home. Good thing rates are low right now
  4. grumman-cats

    Scale Beech KingAir 200. RC12-H

    The kit was drawn with a wing span of 120". Ment to be powered by a couple of .60 glow engines which i will not be using. Right now I'm thinking about a couple of 20cc gassers since it will be a little heavier. I know i. Theory i should go electric but that's really just not my thing. It has...
  5. grumman-cats

    Scale Beech KingAir 200. RC12-H

    This is what I've so far accomplished. Have a long way to go and a lot of small little details to make and 3d print along the way but it should be a lot of fun.
  6. grumman-cats

    Scale Beech KingAir 200. RC12-H

    So i worked on these when i was i. The ARMY stationed in Korea. I found this plan and shortkit on ebay and pulled the trigger not really knowing anything about the designer. So far I'm pleased with the Scale fidelity of the overall design and have started construction. It is a challenge...
  7. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    Here's my wing inlets that i created in cad and 3d printed.
  8. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    I have also acquired the TF F6F hellcat and P40 and just crashed my hanger 9 P-51. Plus i acquired a Beech KingAir 200 that may tank priority of everything.
  9. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    Sorry for the lack of updates to this project. It's been temporarily put to the side with flying season here. I was able to develop some 3d printed wing inlets that have been installed and the gear are installed. Top surface of wing sheeting is complete and dual airtanks have been installed...
  10. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    so here is the final version of my 3d printed wing pylon/bomb drop. Pictured with the 500lb bomb
  11. grumman-cats

    3D Printing General Discussion

    this is my wing pylon/bomb drop for my jerry bates bearcat. It wil have a micro servo attached to the top to fuction the unit. Its spring loaded for easy attachment of the bomb. I've also designed one for the top flite p-47. Wonking on cockpit stuff too
  12. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    Sorry for the delays e everyone. Had some personal issues but all is well. The wing fold got to be to much with everything else happening so i ditched that idea. Currently doing some fine tuning on a bomb release and wing pylon. I got myself a 3d printer. Looks like it will work really...
  13. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    When i decided to tackle this little project I wanted to keep the expense as low as possible. I also am building a TF giant Corsair at the same time so I needed to save some money if I am doing this to both. The beacat hinge line is a little simpler to deal with so I've started this one 1st...
  14. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    So this is the real fold hinge line.
  15. grumman-cats

    Scale Grumman F8F Bearcat "Jerry Bates 1/5"

    This is the 86" Bates bearcat. I'm debating on the dle 120 twin at this time. Should fit ok
Top