• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Recent content by willig10

  1. W

    Bavarian Demon Cortex

    Thanks for the reply: My receiver does not have an "aux" channel. Playing with my radio today (Futaba 14SG) I assigned sitch SD to channel 6 and that is a 3 way switch. Also my radio has a "Gyro" function. So your saying that as long as the assigned channel is...
  2. W

    Bavarian Demon Cortex

    Ok let me rephrase. A,B,C,D,E, correspond to the servos that were removed from the receiver and now plug into the gyro. I do not know where the AUX grey wire needs to go. Thanks Glenn
  3. W

    Bavarian Demon Cortex

    All: Ok some quick questions. I am enclosing pictures of the wiring loom. On the loom there are 2 each red white and black connectors, one each of orange, yellow, grey and green. Where do all of these get connected to in the receiver? Looking at the quick start guide, I see A,B,C,D,E...
  4. W

    Bavarian Demon Cortex

    Oh so during the learning phase the plane does not need to be level?
  5. W

    Bavarian Demon Cortex

    Akfreak: Thanks now one more question. During the learn mode the airplane has to be level correct? I also saw where the airplane has to be still for a few seconds. I am assuming that is right after the bind plug is pulled and the airplane is still level. After the learning mode is...
  6. W

    Bavarian Demon Cortex

    All: Been studying the quick start guide and now I am a little confused. 1. Looking at the picture of the gyro in the quick start guide, where you hook up the wires from the servo to the cortex they are lettered ABCDE and aux. then from the gyro the servo wires get connected to the other...
  7. W

    Bavarian Demon Cortex

    Yellow Jackets: Thanks AK FREAK: my e-mail is willig10@yahoo.com I am working nights currently and out of town. I dont have the gyro yet as it is enroute. e-mail me and I will give you my number and best time to call. Thanks Glenn
  8. W

    Bavarian Demon Cortex

    Ok thanks, I was hoping to get some programming info for assigning the switch and be able to adjust the gains on the fly. I will try to figure it out once I get the gyro. Appreciate it. Glenn
  9. W

    Bavarian Demon Cortex

    Hi all: I just purchased a demon cortex and am using a futaba 14sg with a 14 channel receiver. Do by chance any of you have pictures and setup instructions for a futaba setup? Thanks in advance Glenn
See more
Top