• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

New Paint Gun advice needed

witchfingers

70cc twin V2
The main problem with the accuspray guns is that ultimately it is a throw away gun. It would be great for the occasional hobbyist but I hate them in the automotive industry. After 6 months of use,the metal insert in the handle that your air coupler threads into, loosens up in the plastic body and hisses. Alot of money for a plastic gun. Sata or Iwata with the PPS cup adapter will work forever. You can probably get a used Sata 2000 for cheap.
 

Jetpainter

640cc Uber Pimp
The main problem with the accuspray guns is that ultimately it is a throw away gun. It would be great for the occasional hobbyist but I hate them in the automotive industry. After 6 months of use,the metal insert in the handle that your air coupler threads into, loosens up in the plastic body and hisses. Alot of money for a plastic gun. Sata or Iwata with the PPS cup adapter will work forever. You can probably get a used Sata 2000 for cheap.
I have a Sata NR2000 at my body shop that I've been using for 17 years. It refuses to die, and I refuse to spend $800+ replacing a gun that still works great.

I'm not a fan of anything 3M after 37+ years in the body shop business. The 3M plan is to make a product, (it makes no difference what), get people used to it, then let the quality fall off until its nearly unusable, then come out with a new and improved version for more money that in reality is the original product with a much higher price. The sandpaper and tape I used in the 70's was better than what they sell now after many "improvements".
 

witchfingers

70cc twin V2
I have a Sata NR2000 at my body shop that I've been using for 17 years. It refuses to die, and I refuse to spend $800+ replacing a gun that still works great.

I'm not a fan of anything 3M after 37+ years in the body shop business. The 3M plan is to make a product, (it makes no difference what), get people used to it, then let the quality fall off until its nearly unusable, then come out with a new and improved version for more money that in reality is the original product with a much higher price. The sandpaper and tape I used in the 70's was better than what they sell now after many "improvements".
Ditto on the sandpaper. The Cubitron is a ripoff. I do, however have the 3m/Graco spraygun they made in 2005. It atomizes as good as the Sata 3000 but is slow.
 

witchfingers

70cc twin V2
No matter what you decide to get, if you do a lot of base/clear work, have a dedicated clear gun that is only used for that. If you don't paint but maybe 3 times a year then the Accuspray will be fine.
 

Terryscustom

640cc Uber Pimp
The main problem with the accuspray guns is that ultimately it is a throw away gun. It would be great for the occasional hobbyist but I hate them in the automotive industry. After 6 months of use,the metal insert in the handle that your air coupler threads into, loosens up in the plastic body and hisses. Alot of money for a plastic gun. Sata or Iwata with the PPS cup adapter will work forever. You can probably get a used Sata 2000 for cheap.

Well, you buy the right tool for the job. For hobby use painting airplane parts and misc parts the accuspray does awesome for clear. When it wears out I demote it to primer and buy a new one for clear.

Example, I use a $700 miter saw at my business because it makes me money every day. I also have two table saws that were $1800 each that I use every single day. Does not mean that someone that will use one a few times per year needs to spend that much when they could spend 15% of that price and do just fine.

For a good quality "plastic" gun that uses a new cap and a perfect needle every time or few times you use it......it works amazing.
 
Top