Scale 50% Dalotel 165

Forgues-Research · Jun 26, 2017

Snoopy1 said:
Very interesting read you are doing an incredible job and seems you have all the tools and machinery to do it. Enjoyed reading it will stay in touch on the build. Nice work.

Thanks for the kind words, its a total passion . and its getting there LOL

Forgues-Research · Jun 26, 2017

the picture with the rx, I will be mounting here temporarily, although it will go there but camouflaged. and this is getting setup for the maiden test flight around mid to end of August. so right now a lot in the wiring to keep everything invisible, not an easy task also to start installing ignition modules, and fuel tanks

Jetpainter · Jun 26, 2017

Forgues-Research said:
OK thanks a bunch

You need quality Viton with a Durometer rating of 60A which is soft and pliable. The stuff PSP sells is correct for our application. I just got some from them last week and it's nice and flexible. McMaster Carr also sells it.

Forgues-Research · Jun 26, 2017

Jetpainter said:
You need quality Viton with a Durometer rating of 60A which is soft and pliable. The stuff PSP sells is correct for our application. I just got some from them last week and it's nice and flexible. McMaster Carr also sells it.

Thank you, great information,

Forgues-Research · Jun 29, 2017

Last black trim done but will need a bit fixing, no big deal, and cut out the hole where the electrical will connect from the wing to the fuse

Forgues-Research · Jun 30, 2017

started to pass some wire from the front to the middle but under the spar attach, guess what I can't see a dam thing so I used one these tiny camera with a hook

Forgues-Research · Jul 1, 2017

rough wiring you see here will be tidied up but this is only for the two wings,

TonyHallo · Jul 2, 2017

Will you add any protection for the wires where they pass through the aluminum spar?

Forgues-Research · Jul 2, 2017

TonyHallo said:
Will you add any protection for the wires where they pass through the aluminum spar?

Yes Tony for sure, I will add protection

Forgues-Research · Jul 3, 2017

today got the fuel lines installed through the firewall and another gromet for the electrical such as ignition wires, and two servos to be in front of the firewall, also you will notice, on the side of the airplane, its not a new spar but an adapter to be able to sit the plane done , it will have small wheels

Scale 50% Dalotel 165

Forgues-Research

150cc

Forgues-Research

150cc

Attachments

Jetpainter

640cc Uber Pimp

Forgues-Research

150cc

Forgues-Research

150cc

Attachments

Forgues-Research

150cc

Attachments

Forgues-Research

150cc

Attachments

TonyHallo

150cc

Forgues-Research

150cc

Forgues-Research

150cc

Attachments