• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

3D Printing General Discussion

AKNick

640cc Uber Pimp
Why the aluminum plate? It wouldn’t fuse to it if that’s what you are asking. But could integrate a recess for the plate


Sent from my iPhone using Tapatalk
 

Snoopy1

640cc Uber Pimp
Why the aluminum plate? It wouldn’t fuse to it if that’s what you are asking. But could integrate a recess for the plate


Sent from my iPhone using Tapatalk
The aluminum plate is the plate with the holes to bolt down the propeller. I just thought that it would be nice to glue the cone to it or print it right to the plate. Just thought it would look cool. Instead of a spinner. But you are correct if you made a recess in the bottom of the plastic cone that would even look better and also have a better gluing surface top and sides.
 

AKNick

640cc Uber Pimp
Trying to make a tray for an A123 battery pack. Took me a few hours to create a 3D model. After lots of dimensions and thoughts.... ideally it will be screwed down through the four bolts, and then one Velcro strap to hold the battery in place with room for foam and Velcro.

747f77b2fe3a9dcdeb7296c7cda8c75a.jpg


About an hour and a half print... we shall see if it works.... stay tuned!

1a70f2199c113328f27b84ed6f2af3dd.jpg



Sent from my iPhone using Tapatalk
 

AKNick

640cc Uber Pimp
Trying to make a tray for an A123 battery pack. Took me a few hours to create a 3D model. After lots of dimensions and thoughts.... ideally it will be screwed down through the four bolts, and then one Velcro strap to hold the battery in place with room for foam and Velcro.

747f77b2fe3a9dcdeb7296c7cda8c75a.jpg


About an hour and a half print... we shall see if it works.... stay tuned!

1a70f2199c113328f27b84ed6f2af3dd.jpg



Sent from my iPhone using Tapatalk

f19db1020cf2d6a0f98beefc8a1745ed.jpg

6bd8ead8a00066f525f150d8cef737a9.jpg


Pretty darn close... didn’t give any room for padding though. Battery kinda snaps into place which is cool, but needs finer tuning for a little padding support and my towers need to be a little taller where the Velcro strap goes.



Sent from my iPhone using Tapatalk
 

Decal Dennis

TEAM EP&G
I will when I get some painted. You also have to take up air brushing again when you go back to trains lol, Sooooo $200 plus and I have an Iwata airbrush setup
 

AKNick

640cc Uber Pimp
Workin on a version 2.3 tray
Increased the tab height, end tab thickness, added an additional lightening hole.
Now to wait 1.5hours
8d630e6fc48ad2d948b07390dc8fb370.jpg

8781bd98dbcea648d5c74ced03f2aa74.jpg

I need a different glass bed, mine is warped, kinda hard to get the print started, but still works with a little effort and starting slow.


Sent from my iPhone using Tapatalk
 
Top