• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 'What did you do in your workshop tonight?' thread

Snoopy1

640cc Uber Pimp
Productive day in the shop today. Pulled out the fuel tank, installed new tubing, along with the new fill and return ports. Finished all the wiring and receiver install, and dove into Flight Mode programming and linkage adjustment. Postman should be bringing Red Line oil early this week, so it’s almost time for engine tuning. A few more hours of dialing in the control throws, and fly next weekend. That’s the plan anyway.

View attachment 104853

View attachment 104857 View attachment 104855 View attachment 104856 View attachment 104852 View attachment 104854 View attachment 104858
Looking good just a few more evenings and it will be ready to fly. Hope the weather is ok because that is frustrating when are ready and the weather is not. Good luck.
 

stangflyer

I like 'em "BIG"!
Productive day in the shop today. Pulled out the fuel tank, installed new tubing, along with the new fill and return ports. Finished all the wiring and receiver install, and dove into Flight Mode programming and linkage adjustment. Postman should be bringing Red Line oil early this week, so it’s almost time for engine tuning. A few more hours of dialing in the control throws, and fly next weekend. That’s the plan anyway.

View attachment 104853

View attachment 104857 View attachment 104855 View attachment 104856 View attachment 104852 View attachment 104854 View attachment 104858
Sa-weeet! Dang, I just think you got yourself one heck of a nice ride there. I am really anxious to hear how the maiden goes next weekend. That thing just kind of....like, well....you know? Just says, "Hey, hey....ya you...look at me. I'm kinda bad ass sexy huh?" LOL. Sweet looking plane.
 

stangflyer

I like 'em "BIG"!
Ok, so once again not exactly plane related. But it is... the lil red rocket hooptie hauler so...once again I think it's ok. I took a break today from everything to spend some quality time with the Silverado. Besides, I hate leaving anything left undone and it has just been bugging the crap outta me to get it done. Wow was she ever needing a bath and a good cleaning out. While I was at it, I figured it was time for an oil change too. Oh yeah, and since we're all wrapped up in giving her some T.L.C., I might just as well replace that seat cover that has the split in the seam. The last couple of weeks it has really gotten bad. So, no time like the present to take care of it.

20180812_122619.jpg

First thing I did was drag my tools out of the storage shed and out to the truck. After evaluating the best procedure to get the old upholstery off, it was actually pretty easy. By reaching up under the front of the seat, there is a lip on the cover that slides over the steel seat frame. Once pulled down it was easy to lift and pull back the corner of the cover.

20180812_122630.jpg

After a quick examination it was clear to see this was going to be a walk in the park. Not like the upholstery in our cars from years ago. Everything has been so modernized and so much easier to work with. There are these really awesome plastic "barbed" stripes that lock into fingers that is glued to the seat cushion. Using a small flat blade screw driver, (the same 12" driver I used to adjust the needles on my "dub" motors) the locks are easily unlocked and the barbed strip can then be pulled out.

20180812_123344.jpg 20180812_122751.jpg

The original cover had gotten so out of place that a piece of the foam and very back of the seat was torn off. Fortunately no damage to the seat warmer and the rest of the cushion is in pretty good shape. A little hot glue will take care of that small piece of foam at the back of the seat cushion. Not like it is in a high use area anyway. So once I was ready to put the replacement cover on, I simply reversed the procedure of taking the old off. Slide the barbed plastic strip down into the lock fingers.

20180812_123418.jpg

Then reach around the back and lock the slide lock on the frame rail. The same with the left and right sides of the cover. There are also two smaller tabs that go around the rear of the sides of the cover that have Velcro on them to lock them to the bottom of the seat cushion. Then lock the front of the cover in place on the frame rail and "DONE". Next and final step was to put the seat back into position in the floor boards and replace the front nuts and the rear bolts.

From this:

20180812_134811.jpg

To this:

20180812_175755.jpg

And now it matches the newly replaced console lid cover.

20180812_134728.jpg

There are still some new leather wrinkles in the cover from being in the shipping box. Just like the console lid cover however, they will flatten out in a day or so. And that.... is what I did today.
 

pawnshopmike

Staff member
You boys will figure it out someday. ;) With Stang on the General Motors theme - GMC that is.

View attachment 104873

I looked at the Colorado and the Canyon last year before I bought my Toyota. But they had a fatal flaw. No manual transmission option with 4WD. So I spent my money with Toyota.

@BalsaDust
Here’s a truck you’ll appreciate. We stopped by the Walmart Museum in Bentonville AR last week. They had Sam Walton’s truck on display. 1979 Ford F-150 4x4 with a 4 on the Floor.

1084A01C-50A1-4444-A368-D73954C27735.jpeg
 

WMcNabb

150cc
I looked at the Colorado and the Canyon last year before I bought my Toyota. But they had a fatal flaw. No manual transmission option with 4WD. So I spent my money with Toyota.

Can’t go wrong with any model of Toyota!

GMC definitely does manual and 4WD in a unique way. Automatic with Manual/electronic gear selection via push button “+/-“ on the shift lever. Plus 2WD, 4WD and “Auto” which blends the two as needed.

1D7C1F2C-057A-4F6A-92D1-4D1BA3F55285.jpeg 0A7B2ECB-9827-49C6-A01A-4E2D46CB97F4.jpeg 5A32EBE3-D8D0-478C-9B5B-443D2500ADB9.jpeg A3C9E171-9D6F-49F8-A671-9A0FCA4708A5.jpeg

Had no clue Walmart had a museum. Cool Ford though. Grew up with one just like it!
 
Last edited:

BalsaDust

Moderator
I looked at the Colorado and the Canyon last year before I bought my Toyota. But they had a fatal flaw. No manual transmission option with 4WD. So I spent my money with Toyota.

@BalsaDust
Here’s a truck you’ll appreciate. We stopped by the Walmart Museum in Bentonville AR last week. They had Sam Walton’s truck on display. 1979 Ford F-150 4x4 with a 4 on the Floor.

View attachment 104874


Yeah that looks awesome. Yes I’m a ford guy and just have fun giving the Chevy guys a hard time.
 

Snoopy1

640cc Uber Pimp
Hope you gentleman forgive me but for a person that has lived all over world on projects but most of my life in Canada it just amazes me the brand loyalty there is in the USA when it comes to trucks. Even if one manufacturer makes a better truck that year the loyalists will never change. I watched my good flying buddy go through agony he had a Ford diesel but after 4 transmissions and a lot of cost he still struggled to buy a different make. And still would prefer to be driving a Ford.
 
Top