• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale 35% Krill Extra 330SC....CUSTOM-ARF!!!

Pistolera

HEY!..GET OUTTA MY TREE!
Repurposed an old Christmas tree stand for fuse. Wing in painting rack...rotatable and drying rack on floor.

Decided I better figure out how to hold all these peices during the painting/curing process.

Will be setting up my paint booth this weekend.
20190314_102209.jpg 20190314_102318.jpg 20190314_102241.jpg 20190314_102337.jpg
 

49dimes

Damn I'm hungry
On those A700 servos. Do you plan on using the capacitor with them? And are you going to run them in the SBus system?
If so could you tell us how it does? I failed miserably trying to use capacitors with the BB H50B but it turned out the boards driving the motor were not very compatible. Just my guess but I think a brushless motor with a larger number of poles and greater wind number would be the fix.
 

Pistolera

HEY!..GET OUTTA MY TREE!
It’s amazing how we do things the same. One question do you have fan to extract the air.
Yep...in the 1st pic on the left side note the box with the filter low near the floor. It's connected via cardboard ducting to a box fan in the shop window.

High on the right sidewall is the intake air filter.

Hoping to get a nice down/side draft. We'll see!
 
Top