• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

IMAC Scratch build Laser 200

I am starting a new build of a Laser 200 which will have a wingspan of 100 inches, and a total lenght of 98 inches, which is a bit different then the last one I build a few years ago, also the plans I am using are totally different , which means the landing gear will also be more solid ,

The wings will be jig build which is my favorite way of building wings, and the turtle deck will be done the same way which I have never done this way,

The fuselage will be done pretty well straight forward but also different then the last one I did.

Some of the Technics will incorporate a bit of 3D printing for some bulk heads, (tested already)

I'm leaning towards electric power with 12S Lipos, flight controller will be Booma AR Smoothe flite.
Servos will be Bluebird 43A . Radio is FrSky X10S with my own design casing for more ergonomic comfort,
Finally, please be patient at first as it will be slow at first since it is my winter project but starting now anyway,

As always , any comments are always welcome, keeps me out of trouble lol
 
Top