• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

3D Printing General Discussion

AKNick

640cc Uber Pimp
Believe I made a final version of this. I love the cross bar design, simple, effective, clean, and easy.
I recessed the Futaba letters on the cross bar and it printed well. Slight flex in the case showes that it’s getting depressed enough. At 50% speed, 1.5mm resolution, 30% triangle infill, it’s taking about 1.5hours to print. I can speed it up, and see if the quality suffers or not.

6D10629B-91DF-492F-9B8C-81F04D00C1EA.jpegE5B44BC5-125A-4B3B-B9A4-6F474F63CCBA.jpegB85089C6-4956-4545-B718-5CC28442FE01.jpeg
 

Jetpainter

640cc Uber Pimp
Believe I made a final version of this. I love the cross bar design, simple, effective, clean, and easy.
I recessed the Futaba letters on the cross bar and it printed well. Slight flex in the case showes that it’s getting depressed enough. At 50% speed, 1.5mm resolution, 30% triangle infill, it’s taking about 1.5hours to print. I can speed it up, and see if the quality suffers or not.

View attachment 106663View attachment 106664View attachment 106665
It turned out nice!
 

Snoopy1

640cc Uber Pimp
Hi Nick have two questions and a favour.
1. Can you send me the file to print the holder that you designed for the IBeck please.
2. Can you also send me the file for the ignition holder for the GP-38
3. Trying to fit a 80 mm fan unit to plane that I am in the process of figuring out. If I make detailed drawing of the fan support unit would you be so kind to turn it into a file that is 3D printable.
If you are busy or just do not have time please say so.
 

AKNick

640cc Uber Pimp
Hi Nick have two questions and a favour.
1. Can you send me the file to print the holder that you designed for the IBeck please.
2. Can you also send me the file for the ignition holder for the GP-38
3. Trying to fit a 80 mm fan unit to plane that I am in the process of figuring out. If I make detailed drawing of the fan support unit would you be so kind to turn it into a file that is 3D printable.
If you are busy or just do not have time please say so.

I should upload the IBEC holder to thingiverse.

I am in the process of making a GP Ignition Holder V3 that utilizes larger vibration dampeners. It's taken me quite some time to source the grommets and eyelets. Here is V2: https://www.thingiverse.com/thing:4463761

I'd be happy to try and make a file for the fan unit. Don't think I am ever NOT busy LOL. . . keeps me out of trouble.
 

Snoopy1

640cc Uber Pimp
I should upload the IBEC holder to thingiverse.

I am in the process of making a GP Ignition Holder V3 that utilizes larger vibration dampeners. It's taken me quite some time to source the grommets and eyelets. Here is V2: https://www.thingiverse.com/thing:4463761

I'd be happy to try and make a file for the fan unit. Don't think I am ever NOT busy LOL. . . keeps me out of trouble.
Thanks for that I am still in the sketching and figuring out mode on how to make the fan unit work and fit into a Delta type wing. But when I get so far I will ask for your help.
Where can I find the file for the IBec support.
 
Top