• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

I’m going out flying thread 2019

pawnshopmike

Staff member
50% Cub at daybreak yesterday in Kennett. Great way to start the day.
F9942F5A-63B8-4C2B-B84E-A56AD27427FA.jpeg
 

Jetpainter

640cc Uber Pimp
Spent the weekend at the 3D Bash in Kennett MO. Over 90 pilots were there and the flying was off the hook all weekend.

View attachment 111363 View attachment 111364 View attachment 111365 View attachment 111366 View attachment 111367 View attachment 111368 View attachment 111369
I heard Ryan lost his Havoc EDF there. At least he got a bit more use out of his than another member who's went in on the third flight.
I watch Ryan fly his on Labor day and man did he put on a show!:)
 

Jetpainter

640cc Uber Pimp
This Saturday we had our 9/11 Memorial/Pavilion Dedication/Club Picnic/25th Anniversary. I took Miss Moana since I haven't flown it in a year and a half.

I changed from a 23 x 8 to a 22 x 10 and I really like the results. It sped up the top end, but also sped up the landings. I have a tendency to land too slow, which isn't much of an issue with a big 3D airplane, but at 24 pounds the wing loading on Miss Moana is higher and doesn't really like going very slow.
I flew it twice Saturday, and brought it back out yesterday for 3 more flights. I've been tuning on the DA50 and the radio setup just a bit and it's running and flying great. I'm also finally getting comfortable flying it. The rudder is VERY sensitive around center so I've got the expo cranked up higher than I normally would. It yaws the tail very easily, but you still need to lean on the rudder pretty hard to maintain a good knife edge. There really isn't much flat area on the sides of the fuse, so the nose needs to be pretty high to maintain it. It makes slow rolls a bit tricky to get slow and straight, but doable if you try.

70975476_2976128325735617_1902549900856393728_n.jpg
71001573_1532237480251339_7651554851381313536_n.jpg
70498393_1532237450251342_2711829869519437824_n.jpg
70139801_1532237383584682_2644730136619909120_n.jpg
70602525_1532237233584697_1033434535179583488_n.jpg
71394851_1532237170251370_8848638300647325696_n.jpg
71009408_1532237056918048_8934216022236332032_n.jpg
 

acerc

640cc Uber Pimp
Spent the day at the airfield getting reacquainted with the Laser. It fired up like normal, easy and quick, would not have known it had not been fired up in 6 months or more. I got several flights in and started to get a feel for the sticks again. Tomorrow will be the Ultimate's turn...
 

Attachments

  • 5 - Copy.JPG
    5 - Copy.JPG
    644.6 KB · Views: 358

acerc

640cc Uber Pimp
Man don’t tempt me, would love to join you. Just late notice and very long drive by my self. Very nice of you to offer.
When does it start.
Next Friday, Sep 27... If you decide you want to go, let me know before the end of next Tuesday and I'll take the toy hauler instead of the utility trailer.
 
Last edited:
Top