• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Stuka Ju87 100in wingspan

Blazing Wings

70cc twin V2
Horizontal Stabilizer glued into place. Worked on some other details as well. Everything is built, just detailing left and assembly before priming. I might add some scale details if time allows for it.
 

Attachments

  • 20201123_124345.jpg
    20201123_124345.jpg
    3.1 MB · Views: 326

Snoopy1

640cc Uber Pimp
How do you gel coat after the wing comes out of the mould. I thought you had to gel coat the mould first and then layup the glass and epoxy over the gel coat into the mould
 

Blazing Wings

70cc twin V2
How do you gel coat after the wing comes out of the mould. I thought you had to gel coat the mould first and then layup the glass and epoxy over the gel coat into the mould

You are right, normally I always Gelcoat inside the mold, like with my P40 or Mig3.
However, I did not make molds for the Stuka. But it is not a problem to Gelcoat after the wing has been built.
 
Top