• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Nelitz 1/3 scale Cub build

dhal22

GSN Sponsor Tier 1
I'll need to find figure C on sheet 2.

16690577838571803061752.jpg
 

dhal22

GSN Sponsor Tier 1
Nothing more than just as needed I think. So would I put negative influence on the horizontal stab?

1669057929893250348737.jpg
 

TonyHallo

150cc
Draw a line on the plans from the center of the leading edge to the center of the trailing edge. Measure down to the end points to the center of thrust. Use the difference divided by root length and take the arctan of that number, that is the wing incidence as measured by the Robart incidence meter. Based on the drawing A and B being equal has nothing to do with the setting the wing incidence with a Robart incidence meter.
 

dhal22

GSN Sponsor Tier 1
Likewise the front wing spar mounting point. Locked at the 'A' dimension........ Wing incidence cannot be adjusted unless I differ from plans.

16690803659931917318667.jpg



16690803893391916846748.jpg
 
Top