Theflyinglineman
30cc
I have a newbie question why can't you just use tri stock
Thanks
Adam
Thanks
Adam
3D Fibertech Hyperlite Slick 540 Build Thread
- Thread starter Bipenut
- Start date
Terryscustom
640cc Uber Pimp
Not a dumb question.....the short answer is you are, but with custom angles. The wing where the aileron is cut out is just over 2" thick.
Spats
100cc
What Terry said. It's actually a very good question. I can't believe with all the building I did in the 70's, 80"s and 90"s I ask the most basic newbie questions of Rick and Terry. Not sure what I would do with out all that knowledge and help.
Going to try and put up some good pics tonight.
Spats
100cc
Fibertech
70cc twin V2
NO such thing as a bad question. Like you I was out of the RC for a few years and when I cam back lots had changed. Also when I started building again I had to go back and re learn things I had forgotten. A lot of things I see brought up again are things we did years ago but know with new twist. It’s all good info
Spats
100cc
Finally got back to work on it today. I sheeted the stabs, they are in the bag drying tonight. Most of my time went to mounting the cowl. I used Loctite Hysol to glue the cowl. This stuff is crazy strong and easy to work with but very $$. The rudder is mounted and I have plenty of throw using 1" stock on the rudder. After flying tomorrow I hope to get the wings sheeted.
Bipe I hope your back is healed I haven't seen any posts.
Bipe I hope your back is healed I haven't seen any posts.
Attachments
Spats
100cc
Looking good. Nice work. Ya also lets rub it in about flying. LOL
LOL. sorry buddy.