• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Snoopy1

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    This plane is being designed and built by ”HeyLuc” and Snoopy1. just to introduce HeyLuc he has been in the hobby for many years And is a scratch builder for many years, you will get to know him during the build. I have heyluc to thank for talking me into the build. We are quite the ways into...
  2. Snoopy1

    Scale Balsa USA P51 Mustang, info

    Thinking of buying and building a Balsa USA P51 mustang. Has anyone built one or know anything about the plane. Found one build thread on rc scale builder site. Have DLe 20 Ra do you think it will be sufficient power for the plane.
  3. Snoopy1

    Help! ESC wire length to batteries

    The question is how long can the wires be from the battery to the ESC, and how long can the wires be from the ESC to the motor. What are the consequences if making wires to long or longer and by how much. I do know the longer the wires are from the battery to the ESC has an impact on the life...
  4. Snoopy1

    Help! OS 75 AX - E-4040 muffler

    Gentlemen if you can help me need a OS muffler , muffler number is E-4040
  5. Snoopy1

    Help! YS 120 oil question

    Cleaning up a YS120 but have run out of the special oil that is recommended by YS to fill the engine with for storage. Would anyone know what oil can be used that will not ruin the internal silicone gaskets and diaphragm of the shelf
  6. Snoopy1

    Help! Aura 8 setup questions

    Gentlemen would like know more about the Aura 8 and how it works. Also like to know more about some of the details in the configuration software. Would like to deal with one at a time and work our way through it. For example; Rate P- Gain. 1. Believe this sets up the total sensitivity of the...
  7. Snoopy1

    Help! Need some help programming a JR 12X Radio

    Trying to set a three position switch to control a gyro. For example on aux 2, which is a three position switch. At present when I look at the monitor when flip the 3 position switch it goes from -100% to 0 to +100 %. What I would like to have is that the switch is at 0 all the way up and then...
  8. Snoopy1

    Discussion I believe that Toledo has been cancelled.

    Just found out.
  9. Snoopy1

    Discussion Who is planning to go to JoeNall. 2020

    I know it is still a way of but as of right now I am planning to attend the show. Missed this year hopefully not next year.
  10. Snoopy1

    Help! LiPo voltages at different stages ?

    OK have question on LiPo. Yes we all know max voltage is 4.20 volts, storage is 3.85 volts and minimum is 3.2 volts for me. Ok 3.85 volts is for storage. But what voltage is acceptable to leave a LiPo at for say 5 days and NOT do any damage. Or do you need to always bring it down to 3.85 volts ...
  11. Snoopy1

    Help! YS-120AC Cannot shut it down?

    Have a few of these but never this problem it is YS 120AC. Runs great puts out all the power no hesitation, run perfect except cannot shut the motor down after a flight. I believe it has an air leak some were but cannot find it. Stripped it down check everything cannot find a thing wrong...
  12. Snoopy1

    Help! Need to get in touch with Slimline mufflers.

    I seem to be having difficulties getting in touch with Slimline. Sent them some money at the beginning of April for some parts. Just cannot get in touch with them phoned them no answer and emailed them several times no reply. Need some help get in touch with Slimline or let me know if they still...
  13. Snoopy1

    Discussion Help to find a true 150 cc 3D plane.

    Been looking for a while. Most planes in this size are geared towards the 200 cc and up. And most weighing 40 pounds and up. Like to see something between 36 and 38 lbs for a DA 150. Not looking to buy the plane right now but some time in the future just looking ahead for a project.
  14. Snoopy1

    Scale 1/3 Scale Extra 330L Build.

    Hope that I do a good job at presenting this Build. I will appreciate all the help I can get from all you gentlemen. Hope to draw from all of your experiences to help me complete this build. It is an older kit so it will be a challenge to keep it light and be painted.
  15. Snoopy1

    Help! The difference between a DA85 and a DA100L.

    If someone ones both or did can you give the advantage of one against the other have a DA85 and would like to a little more power in the plane. Will the DA100L do the trick or is not worth the effort or the money.
  16. Snoopy1

    Wanted Need header for DA85 -50mm drop

    need a header for a DA85 with a 50mm drop.
  17. Snoopy1

    Help! Need a good plane for windy days 30 to 50cc

    The weather is changing around my area and have several good 3D planes but are not good for windy days. So I am not getting out to field as much as I would like too, I am thinking of getting some thing that can handle the wind better. Does anybody have a good plane they are flying in the wind or...
  18. Snoopy1

    INVERSA 33 ARF assembly by Hanger 9. Motor OS-GT33

    Well gentleman this is my first build thread, and all I ask please be patient and need all the help I can get. How did I end up with this plane well went to the LHS just to have a look around and pick up some small parts and some CA. Met the owner while he was doing some cleanup. While he had...
  19. Snoopy1

    Wanted Pitts-Muffler OS GT33

    Need a muffler for an OS GT33 gas engine. Would prefer to buy a JTec muffler. OS depending on the price.
  20. Snoopy1

    Need some advice on a new 30cc 3D plane.

    Just banged up my 30cc Sundowner pushed to hard on the throttle and pulled to hard on the elevator and snapped it into the ground. Need a new 30cc 3D plane. Have a 33OS GT for it with a standard Pitts muffler that comes with it. Looking at. 1 AJ Lazer like the plane never owned any of his...
Top