• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. jmart95

    My New 3D Extra 300 Prototype For Fly-Model

    Yep, my Dad has the MKS's on the way, and when I decide what motor I want to use, I'm going to try the BK servo of similar specs, which is in the same price range as well, expensive, but they're some really impressive servos. How are they(mks) working for you in the 64? Also, out of curiosity...
  2. jmart95

    My New 3D Extra 300 Prototype For Fly-Model

    Couldnt agree with you more! One more thing, for the 65 inch version, what size servo are the slots designed for? Right now im kinda dissappointed that i bought a 57, because im spending way too much money on servos(couldve had perfectly set up 30cc for the same price), most micros(or is it...
  3. jmart95

    My New 3D Extra 300 Prototype For Fly-Model

    Sounds like my king of plane! With that said, I think the number is anything past 38 degrees on the ailerons acts as airbrakes, but that's what experimentation with the prototypes are for!
  4. jmart95

    My New 3D Extra 300 Prototype For Fly-Model

    Sweet, really curious to see the end result!
  5. jmart95

    The Knife Edge Spin

    Nicely done Drew, I've always thought switching between the two looks good(and love a competition!)! Also how are you recording your session on realflight, I know you can't export a realflight recording through realflight so I'm not sure what to do.
  6. jmart95

    The Knife Edge Spin

    Here's a recording from realflight of how I do it(really sloppy flight, haven't been on the sim in a while), but at least you can see my stick inputs. Didn't wrap up tightly because of realflights physics, but it's pretty violent in real life(Added music because of background...
  7. jmart95

    The 3DRCForums -Discuss Anything Thread-

    For sure, got some servo arms too in the order, and looking at what I want for my 87 as well!
  8. jmart95

    The 3DRCForums -Discuss Anything Thread-

    Oh, and it's the yellow spacer that broke, which is glued on, not molded integrally.
  9. jmart95

    The 3DRCForums -Discuss Anything Thread-

    I've broken a few of them, but that was from the smaller plastic ones with a wooden, prop, and the prop would slip from the backplate and eat the spinner and that was always a few weeks in(150-200 flights maybe), with the ones with backplates we stick a piece of sandpaper between the prop and...
  10. jmart95

    The 3DRCForums -Discuss Anything Thread-

    Oh, and in other news: just switched to a bigger spinner(to run a xoar rather than the crappy apc) on my super vyper, and of course it broke halfway through the first flight, anybody have a suggestion for a better spinner(this was a 52mm extreme flight with aluminium backplate, don't want any...
  11. jmart95

    The 3DRCForums -Discuss Anything Thread-

    Just got transmitter bling for both my Dad's main radio and my main radio, thanks Aztech Aeromodels for the awesome product and fantastic service, and Ahblair4 for turning me on to the pointless-yet awesome- transmitter bling. We have yet to see if it makes either of us a better pilot, but...
  12. jmart95

    The Knife Edge Spin

    ^Exactly how i do it, and though there are other way ive done it, i think that is the easiest, most consitent way.
  13. jmart95

    The Knife Edge Spin

    There's a few ways of doing it, but here's how I do it: downline(any throttle setting) add full aileron(do about 1/2 roll) kick in full rudder(same direction as aileron) and down elevator(or opposite rudder of aileron and up elevator for positive ke spin) ease the throttle on over about a...
  14. jmart95

    The Lomcevak

    extreme flight 48 inch extra 300 exp
  15. jmart95

    The 3DRCForums -Discuss Anything Thread-

    I got the same, so I think you got it :)
  16. jmart95

    The 3DRCForums -Discuss Anything Thread-

    4.4375 is 63.96396396396396% of 6.9375 so with that ratio, 63.96396396396396% of 8.125 = 5.197072072072072 according to an online calculator, I'm to lazy to give a real go at it :)
  17. jmart95

    The Bonehead Files

    Heh, here's another crappy day at the field story(and I think it's only proper to warn all of the graphic aid I have attached), from back when my dad had his 64 mxs. A dog just walked up and took a a dump on the wing. picture below for those who care to see
  18. jmart95

    Ohio 3DHS Fly Low In Spookfest 2014

    Can't wait, had to miss your fli due to my Dad's ork schedule, but we are 100% in for spookfest!
  19. jmart95

    The 3DRCForums -Discuss Anything Thread-

    She looks good! I'm in need of some vinyl too, what's the best way to contact you, and are you able to use the 3dhs logo in your designs?
  20. jmart95

    New Here? Introduce yourself!

    Welcome aboard Kevin! If you can do forward flight with a heli, flying a plane is nearly the same thing, especially since you've been practicing on the sim. Have fun and give us an update after taking her for a spin!
Top