• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

IMAC Written Call Sheets

Krzy4RC

GSN Contributor
Figure 5 - Pull to vertical, 1/2-roll centered on vertical, push a half-loop, 3/4 roll centered on down-line, pull to upright exit.
 

Krzy4RC

GSN Contributor
Figure 7 - Push/Pull Loop - 2 lines indicate the roll is to be centered at the apex of the loop.
 

Krzy4RC

GSN Contributor
Figure 10 - Reversing P-Loop - Pull to Vertical, 1/2-roll cetntered on vertical, push 1/2-loop and immediately pull 1/4-loop, with 1 positive snap after 1/4=loop, exit upright.
 

thurmma

150cc
Figure 4 is a "Pull-Back" Sharkstooth. I would call it...Pull back to a 45 degree up line, 1/2 roll centered on up-line, push to a vertical down with a 2 of 8 on the down-line, pull to upright exit.
I always make sure to tell the pilot cross-box if the exit is cross-box. Helps ease the nerves when you are looking at either the belly or canopy after the rolling manuever :)
 
Top