• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. emtp275

    88" Pilot Extra 330

    The Prop?
  2. emtp275

    88" Pilot Extra 330

  3. emtp275

    Extreme Flight 91 Yak

    Ill order some from B&E for the outside just stuck it there to see what it looked like
  4. emtp275

    Extreme Flight 91 Yak

    Servo mounting completed this took time as I played around with the Geo and attempted to get all the throw I could and keep arms short 1.5 ailerons 2" elevators, I was able to get 60deg on the tail and 55deg on the ailerons should work out ok. Stock DLE stand offs were 0.47" too long so I used...
  5. emtp275

    The I'm going out flying thread 2016

    I did it as a sorta budget beater, DLE 55 on pro flow good power to do most of any thing even though it come in at 18.4lbs dry
  6. emtp275

    The I'm going out flying thread 2016

    EPA Called me about the smoke after working on your settings, Turns out you pissed off a whole block LOL. Oh and I went back out after lunch with the fam to give the extra another shot test and tune. Got a few good pics.
  7. emtp275

    Extreme Flight 91 Yak

    I told him I needed one, I may just check on that and if not Ill order one and the No Limitz 4" spinner I want
  8. emtp275

    Just plain sexy!

    Not WR.... But American made and big and sexy haha
  9. emtp275

    Group Build, 20cc Profile ARF, Who's In?

    @mulehead1969 has one that is still sitting in the box, you may con him into a build LOL
  10. emtp275

    Speak up and win!! We're turning ONE, time to celebrate!!

    Favorite Part is: Duh RC Airplanes in Giant Scale all day every day! Least Favorite: Lack of classifieds but there's nothing you can do to fix that if people don't post Improvement: Mobile App So is can take GSN any where
  11. emtp275

    Extreme Flight 91 Yak

    I worked several hrs last night, looking back I got very little done but today is a new day, Im off and its nasty out so I will get work done today. So I went over all the glue joints I could get to with CA, this is habit from other builds not sure that I have ever prevented a crash from failure...
  12. emtp275

    Extreme Flight 91 Yak

    Now may be a good time to say I live in the sticks, Getting work done on the yak and crossing my fingers my ragged internet connection lets me post progress.
  13. emtp275

    Extreme Flight 91 Yak

    LOL that was a joke we all went out to eat and she said she had never had Boone's Farm but once so I went on a search that ended empty handed LOL, Although it would have been funny to see cuz she never drinks.
  14. emtp275

    Post your servo, receiver, and battery setups

    Np Now your taking full advantage of that 9ch Rx :big_yes:
  15. emtp275

    Post your servo, receiver, and battery setups

    My 100cc runs 9 servos on 8ch Rx, I have a 14 to replace the 8 with just havent gotten around to it, But you being the Hitec guy why not program servos and save ch's? I can run every thing including smoke on a 100cc with 8ch rx by programming the Ailerons and rudder servos with a smart fly power...
  16. emtp275

    Extreme Flight 91 Yak

    I got a little more work done on the Yak last night, landing gear is mounted, I found that it was easier to place the airframe on its side to install the main gear due to having to place the bolts so deep into small spaces that you can not reach by any other means than an Allen wrench. Tail...
  17. emtp275

    The I'm going out flying thread 2016

    Well another eventful day at the field with @ChickenBalls and @mulehead1969, I need the bad luck to subside any time, I did get lucky today as I come in for a fast low knife edge on the pilot extra, Let it sink and added rudder to level off the sink and nothing! added more and she kept getting...
  18. emtp275

    The I'm going out flying thread 2016

    Well we had a good day at the field today with @ChickenBalls and @mulehead1969, I had invited @PlaneNutz1 over for a little fun and decided to buy a few dogs and throw them on the grill, turned out awesome had a new guy show up and helped him alot, also helped another member with his landings...
  19. emtp275

    Ultimate Bipe Assembly

    Bling? only after the maiden
  20. emtp275

    Extreme Flight 91 Yak

    Na it was indirect charcoal is all the way at the back
Top