• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bipenut53

    Xpress does a BANSHEE build...

    Wouldn't be hard to believe..... He does drive a Jeep.... :scaredchair:
  2. Bipenut53

    Hobbywing Platinum HV 160A ESC

    Lol Mike!! Too funny!!! Yes 3DMIKE and Bloosee you are both correct and I have to agree with you. It is a big investment we have flying over our heads to trust sub standard parts. Unfortunately we as responsible hobbyist's need to sort through the garbage to get to the good and sometimes with...
  3. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    Ok well the actual building has begun... check out page one to see the progress....
  4. Bipenut53

    Hobbywing Platinum HV 160A ESC

    Ok yes perceived value, everything has a perceived value until you receive it and actually use it, then the true value shows through. I am a person that I gotta see it to believe it. I understand where you are coming from Bloosee and I wish things were different in our hobby, but lets face it...
  5. Bipenut53

    Hobbywing Platinum HV 160A ESC

    Well put Mike, especially the disclaimers... I couldnt agree more! .... I will input here, I remember a day when HiTec servos were considered "Those cheap servos, but they will do" Now they are in the same price range as the other name brand servos because of perceived value...
  6. Bipenut53

    Hobbywing Platinum HV 160A ESC

    Nice Bushwacker!! I have used several Hobby Wing ESC's in airplanes and have always been happy. That is a good price for an ESC that size! Good find... Thanks!
  7. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    Yes it very well thought out... With a few twists and interesting ways of doing things... And thanks Bush!!
  8. Bipenut53

    Field Trip to see SupaTim!!

    Absolutely my pleasure!! Thanks 3DMIKE!!
  9. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    The review of the Legacy Aviation Turbo Bushmaster. This airplane is everything it is billed to be and more. The build was detailed and a lot to pay attention to. The quality of the kit is what you come to expect from an Extreme Flight airplane kit. Straight forward enough that I could build it...
  10. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    Here is the flight video of my Turbo Bushmaster. One thing I must say, the camera we used is not a video camera so the quality of the video is fairly poor and looks better in the small window. Thank you to cam4569 for his time in shooting the video. https://www.youtube.com/watch?v=zXw3D4zzSfI
  11. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    It is time to get the Torque motor ready to install on the firewall. Locate the collar that goes on the shaft of the motor and install it on the shaft and use lock tight on the grub screw that holds the collar in place, and then put the motor mount in place and use lock tight on the bolts holing...
  12. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    After the horizontal stab is finished, I moved onto the rudder for future use. I will use the same procedure as I did with the wings and elevator hinging process. Now its time to install the control horns. As you can see, all the hardware comes in their own labeled bags. I...
  13. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    Ok so back at it again. The tail wheel assembly is next. You will notice there is a steering arm included with the tail wheel. The reason for that is the rudder does not extend to the bottom of the fuse like on most common 3D models, so to over come this problem there is a tube inside the...
  14. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    Ok so lets start building!! First off this airplane is so new that there isn't a final manual published yet, so I am going to wing it. I have built several Extreme Flight airplanes in the past and most of everything looks pretty familiar. I chose to start with the fuselage I cant stand a fuse...
  15. Bipenut53

    The 3DRCForums -Discuss Anything Thread-

    I am very interested in what you think of this airplane and how it flys..... Please keep us posted and Pictures/Video would be great too!!
  16. Bipenut53

    Official 3DRCF build and review of Legacy Aviation Turbo Bushmaster

    Howdy all!! Well I am the proud owner of the new Legacy Aviation Turbo Bushmaster (part of the Extreme Flight family) I am very excited about this airplane. I have been waiting for its release since the announcement at last years Joe Nall event when Extreme Flight announced the merger of Extreme...
  17. Bipenut53

    The 3DRCForums -Discuss Anything Thread-

    Ok here it is AKNick click Here for the page That is if you really are bothered with the arc, personally I just hook it up and go lol
  18. Bipenut53

    The 3DRCForums -Discuss Anything Thread-

    That's great Nick, Yes that is normal for that to happen. I get that with most of my 6s setups. There is a way to eliminate that with an arc eliminator, I will find it and post it here...
  19. Bipenut53

    Legacy Aviation - 65" Turbo Duster IT'S HERE!!!!

    I have to agree with you 3DMIKE, when I was at his warehouse this airplane was on one of the stands. It is a really good looking airplane. I have always had a soft spot for crop dusters, this one looks its part..... Until you kick the high rates on and cut loose... Here is SupaTim flying this...
  20. Bipenut53

    HobbyKing Piaget EPP build log

    Almost done! Looks good!
Top