• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bunky.F.Knuckle

    What is the best EDF fan?

    Schuebler and BVM are the tops.
  2. Bunky.F.Knuckle

    BlueBird HB 50B servos

    That, I wish we could do, my man. I understand and respect his position on reselling to the general public, servos that have been previously mounted and used. We discuss that here and there, but there is absolutely no swaying him on that. ThunderBolt RC doesn't have any instock? My plan for...
  3. Bunky.F.Knuckle

    BlueBird HB 50B servos

    Chad got a couple of 50Bs back for return, claiming a jitter in the sweeping range. He tested them on the bench, with a servo tester, and they are fine. He sends them to me, and I use my XG11, and set them up on my Compy MX2. Set the radio to servo test, and go thru step, quick, slow and...
  4. Bunky.F.Knuckle

    Aerobeez 45% Extra 300 assembly

    HS 81 or 85 MGs. ;) Really, just need a servo that has good speed, for throttle. Your carb will only transition so fast. I just bought 2 Savox 1250 HVs for my 93" AJ Laser with a 3W 55xi and tuned pipe. That should be flying in a couple of weeks.
  5. Bunky.F.Knuckle

    Gyro's for planes

    Gyros are for helis. End of story. :) I will not fly an airplane if there is a gyro onboard.
  6. Bunky.F.Knuckle

    Average mah usage for 100cc

    My 108" Corvus draws ~400mAh/flight. Running dual 3600 2S Glacier LiPo's. Ignition is drawing off 1 pack, so, 1 pack will show a little more usage than the other.
  7. Bunky.F.Knuckle

    Prop assistance please

    The 28x9.5 is pretty much a really good 3D prop. If you are wanting to cut back on some airborn noise, drop down to a 27x11 or 26x12. Larger prop diameters will prop rip so much easier than a smaller diameter. As said before, throttle management is key. Don't fly full throttle to the next...
  8. Bunky.F.Knuckle

    Sunday night GSN Update

    Glad it all worked out, before and after today. :)
  9. Bunky.F.Knuckle

    Sunday night GSN Update

    I wasnt even upset when I read the email. I felt that with the procurement of 3DRCF, that things would go down hill, but not this soon. And now, Good Guy Paul, sets up and buys the forum. Kudos to you, Paul. This is a tough market to be in. But, you have made many folks happy. I wish you...
  10. Bunky.F.Knuckle

    BlueBird HB 50B servos

    Me too. But then I would be down a flyable airframe. I have 7 8711HV's that I would pull too. Again, downing a flyable airframe.
  11. Bunky.F.Knuckle

    Sunday night GSN Update

    TFC for me, fellows.
  12. Bunky.F.Knuckle

    Sunday night GSN Update

    I've been saying that for years. After my Edge blew a wing off the tube socket, and my buddies 50cc Yak airframe breaking at the turtledeck while I was flying it, I cannot recommend and will not recommend AeroWorks airframes.
  13. Bunky.F.Knuckle

    3D JAG's 35% Carden Edge

    Gotcha.
  14. Bunky.F.Knuckle

    3D JAG's 35% Carden Edge

    Also, if you have a Carbon spinner, change it out for an Aluminum one. Plus, if you can put all your batteries on the engine box, try that as well.
  15. Bunky.F.Knuckle

    RCGF 120

    It has good transition. Loads of humidity with the rain coming thru last nite.
  16. Bunky.F.Knuckle

    RCGF 120

    Nope! Im at 6450 with the 29x9. It has more than enough gumption to get me out of a pickle. I may pick on the H a little..... L is fine.
  17. Bunky.F.Knuckle

    BlueBird HB 50B servos

    Not unless he buys the other 7.
  18. Bunky.F.Knuckle

    BlueBird HB 50B servos

    Yeah. My Dalton 300 would pull around 350 or so/flight. And that is with 8911HVs.
  19. Bunky.F.Knuckle

    RCGF 120

    3 more today. Need to commence twisty thingie twistin...
  20. Bunky.F.Knuckle

    BlueBird HB 50B servos

    2 flights tonite. Using just a hair over 400mAh/pack/flight. Which is to be expected with a high powered servo. DC source, current consumption goes up too!
Top