• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    Here's the can I have for chicken nutz, bottom one is his top is my pro flow, I put these in the same plane I took his out and put the pro flow in, The stinger came out in the same place.
  2. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    I know im depressed i couldn't get to 85deg, but jokes aside I have been impressed with his one sense the moment I opened the box, I have put all together maybe 4hrs of work in her and all thats left is waiting on the new power plant so i can install it and figuring out the balance so i can...
  3. emtp275

    Prop database.

    I think you need a few more engines LOL I just kid
  4. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    I know I don't belong here as the Extra kinda guy but......... She's alive! LOL Should be able to control it with the throws I have but getting more means shaving the control horns to clear the stab .
  5. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    And talking about buying another 30cc in front of his old lady, I knew that was the good stuff then.
  6. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    What is in front of the gear block in this picture? Good place for a front dump to exit.
  7. emtp275

    The stick bangers thread

    No video lol most people would fall asleep in the first 30sec, Heck yea load it up.
  8. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    Yes it is
  9. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    I think the link that @stangflyer posted sounds alot like what your talking about.
  10. emtp275

    Prop database.

    DLE 111- Falcon 28x9 CF - will rip with out throttle management DLE 61- Vess Stealth 24b also think a Falcon 24x9 CF would be awesome EME 55 with proflow can- Falcon 23x9 CF this one will start to rip in downlines just a warning All used for 3D flight and work really well
  11. emtp275

    The stick bangers thread

    Took your advice and left chickenballs slick alone and took the 104 up, prop rip made me grin and the violent moan of the airframe in KE spin is awesome
  12. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    Or an MTW, you can get it for 65$ that way Im not the only one that kicked in the rear end LOL, things we don't do while having a drank..... Order any airplane parts
  13. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    Dont think the last one will work its kinda short.
  14. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    Transition is smoother on the proflow and little more top end but that 55 still ran strong with the cheep can I have
  15. emtp275

    Pilot 30% Edge 540. Who's Flying it!?

    Think you should do a build thread on yours...Yea sounds like a good Idea, I worked on mine maybe an hr last night and I got the control horns glued in and the tail servos installed and center and end points dialed in, This will be a stupid fast build lol you'll get at least 10 pictures and 1/2...
  16. emtp275

    7954 Issues

    LOL who knows, I can be hard on equipment but this being a 30% and having the smallest control surfaces and arms of any of my gasers id say Im not abusing them. But all is well Hitec takes care of us very well and the servos normally work really well, best bang for your buck when it comes to servos.
  17. emtp275

    7954 Issues

    Is there any thing that would cause this that you can think of? both that have gone bad are in a stab which is a tight space, could this be an issue of over heating the motor?
  18. emtp275

    7954 Issues

    Both that I have had go bad were in the elevator also, the first one started to jitter bad and I shut the plane off and could bairly move the elevator by hand I was afraid that I was going to rip the control horn out it was so hard to move. Hitec replaced the motor in it and it was fine.
  19. emtp275

    Peak Models 32% Extra 330 SC

    Dig a little deeper you may find oil!
  20. emtp275

    7954 Issues

    I had a Hitec 7954 go bad in April, it kept getting harder to move by hand with the radio off little at the time, well before it locked up I sent it back for repair and Hitec fixed it free of charge, well now I have the same issue again after removing the servos from the plane to set up a new...
Top