• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Joe Hunt

    Pilot RC 107" Extra 330SC

    Yeah, most guys don't take the time to make sure their non-pulling cable is not getting loose (and worse is tight). If the control horn pivot point on the rudder is offset from the hinge line of the rudder than you need to use that same offset amount on the rudder arm (if the cables are...
  2. Joe Hunt

    Pilot RC 107" Extra 330SC

    And, do you have some type of vibration absorption (foam or velcro) under the IBEC and also under the ignition? Under the ignition I like to leave an air gap for cooling, as well.
  3. Joe Hunt

    Pilot RC 107" Extra 330SC

  4. Joe Hunt

    Pilot RC 107" Extra 330SC

    Man you do nice work, Beaublus! :way_to_go: Your throttle resolution should be awesome with that long arm on the carb! Awesome! I'm not thrilled with your wiring on the TechAero IBEC, though. There is a "dirty" side and a "clean" side. And, you have the clean side running back over the dirty...
  5. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Okay, working on another site, same date. :)
  6. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Okay, how is everyone with two weeks early? October 21-23 instead of Nov 4-6?
  7. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Jeff says to stay 15 minutes away in any of three direction, but not there in Perris. haha So, Moreno Valley, Hemet, or Menifee.
  8. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Moreno Valley is like 15 minutes away and they have all the normal modern restaurants and hotels. But, we'll see what Jeff can come up with. :)
  9. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    There is overnight camping. I'm hoping a lot of guys do camp, so I can leave my planes at the event at night. haha :) I'll write Jeff Szueber about recommended motels, he should know.
  10. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Come on! :)
  11. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    And, no wind... oh, and 68-70 degrees... don't forget to manifest all that, as well. haha
  12. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    2.6m :)
  13. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    That's why I'm hoping for rain all of October. haha
  14. Joe Hunt

    Hitec servo question

    I just set 9380s up on two more planes and still can't believe how great they are. They setup so easily compared to any other brand and model of servo. 93xx rules! haha Also, I am flying them now on a 1/3 scale plane, first time for that, and on these little girly man 1/3 scale planes, haha...
  15. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    I flew there 10 years ago...
  16. Joe Hunt

    Hitec servo question

    No need, no need. :) Hitec servos work just like any other servo. However, let's say you're setting up your aileron servos. Let's say you have a plane with one, two, or three servos per aileron. Let's say you setup the first five where you want them; all with equal travel. Then let's say the...
  17. Joe Hunt

    Hitec servo question

    Hi Randy! Hitec makes a lot of servos. Many are budget minded servos and might not center as well as you'd like. But, next time you're getting servos for a bigger good plane (I know you have a few)... try out the 93xx series. They are amazing at everything, including centering. :fist_pump:
  18. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Nice work, Tanner! Although, you still need to learn to spell! haha
  19. Joe Hunt

    Joe Hunt RC 3D fly in!! November 4-6

    Susan Hayward and Ann Margret, both at 20 years old, wouldn't that be something? :) Hard to find a redhead, but we can put a red wig on @Xpress . haha
  20. Joe Hunt

    Assembly: EF 110" Yak-54 V2

    I'm going to add a slot closer to the servo... like I did here on my Pilot RC 122" Extra.
Top