• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bunky.F.Knuckle

    ZDZ 112 Champion mounting

    Sunday is Funday. Time to get a good tune on that engine.
  2. Bunky.F.Knuckle

    The I'm going out flying thread 2016

    Sunday is Funday. Putting on my funderwear!
  3. Bunky.F.Knuckle

    SOLD! Mezjlik 29 x 12 EVO 3 blade

    DA 170 uses 6mm bolts, 3W uses 5mm. Same bolt pattern, just larger holes.
  4. Bunky.F.Knuckle

    IMAC Double Build, Carden Pro 124" Extra 300 40%

    Good call on the anti rotation pin.
  5. Bunky.F.Knuckle

    Mixing question

    Instead of adding weight, move your heaviest item forward. Moving your engine fwd 1/8" will change your cg, but not drastically. I dont like adding dead weight to an airplane.
  6. Bunky.F.Knuckle

    150-200cc Extra 300SP

    Taildraggerrc.com my friend. 20ga wiring upto 72" length.
  7. Bunky.F.Knuckle

    Switches for 30cc to 50cc

    http://www.taildraggerrc.com/jr-e-switch-failsafe-switch-with-deans-ultra/
  8. Bunky.F.Knuckle

    IMAC Double Build, Carden Pro 124" Extra 300 40%

    You really only need 1 anti rotation pin. If I remember correct, on both my Cardens, the anti rotation pin is just in foam, the balsa root supports the pin. I think the root cap went on prior to the sheeting, on both my Cardens.
  9. Bunky.F.Knuckle

    IMAC Double Build, Carden Pro 124" Extra 300 40%

    I went to Secraft wing nuts. Wings on my MX2 dont come loose again. I just never understood the concept behind just using 2 retainers for retention and anti rotation.
  10. Bunky.F.Knuckle

    Muffler problem.

    Because if using mufflers, noise diverters, stock exhaust or whatever you want to call it, most times, if not all the time, you have bolts that go into the muffler itself.
  11. Bunky.F.Knuckle

    IMAC Double Build, Carden Pro 124" Extra 300 40%

    I dont think they sell just the wing retainers... I know they sell the 6mm threaded nuts, which are near junk, honestly... Best bet is to do a single anti rotation dowel pin, and then 2 bolts for retention to the fuse, much like the Dalton you fly. But if I recall, the Dalton uses 2 dowels...
  12. Bunky.F.Knuckle

    IMAC Double Build, Carden Pro 124" Extra 300 40%

    He is a good friend of mine. Will Berninger. He flys in Ohio. Stellar craftsman, and all around super nice guy, along with his wife, Marian.
  13. Bunky.F.Knuckle

    3D 100cc PAU Viper

    On the job line.... Looking at changing again.... I have a new team lead in Maint, who is cutting my hours, and only mine, therefore pulling money out of my pocket. Just when I start to get my nose above water...... Now, I have to figure out how to make another $1K/mo....
  14. Bunky.F.Knuckle

    Airtronics Users

    If I weren't flying JR DMSS, I would be flying Airtronics. Their systems have come leaps and bounds from the 72 MHz days of the Vanguards......
  15. Bunky.F.Knuckle

    Any Monokote users here?

    Thats friggin GREAT!!
  16. Bunky.F.Knuckle

    For Sale Carbon propellers and spinner

    Message sent on the 27x11.
  17. Bunky.F.Knuckle

    Pilot-RC 35% EDGE540V3 with hamilton scheme

    Sell it to that old goat!
  18. Bunky.F.Knuckle

    Aerobeez "BANSHEE" 91" Slick build

    Glad we shamed you into it. :)
  19. Bunky.F.Knuckle

    Aerobeez "BANSHEE" 91" Slick build

    Hate to see you lose it due to a piece of crap ez connector. I had one come apart on an elevator. Not my airplane, but I was flying it. Eventually means to me is that it will never happen. Change it now, or pay for it later, thats how I see it...
  20. Bunky.F.Knuckle

    Muffler problem.

    Firstly, clean bolts and clean internal threads. Then surface (sand flat) the muffler manifold. Then apply copper permatex, slide your bolts with lock washers thru. Apply some copper permatex to the bolts and run them down. TFAR, That Feels About Right for torque. I use a long Bondous 4mm...
Top