• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. yakken

    IMAC Carden Pro 124 Build, My Dream Plane

    Very nice
  2. yakken

    Share your Trailer Ideas Here

    I was proud of my trailer till i look at your guys.
  3. yakken

    To drain or not?

    I always run them dry. I guess its just a habit. Never really had a starting issue. It might take a couple more flips but always starts.
  4. yakken

    The I'm going out flying thread 2016

    Nice
  5. yakken

    The I'm going out flying thread 2016

    I been wanting to get one of those. Hows it fly?
  6. yakken

    Power systems/ Hitec A9?

    Its tough to get ganged servos to match. It can be done just takes a little more time.
  7. yakken

    Power systems/ Hitec A9?

    I heard that on the a9 to. Wonder if they still say dont run two rx with the a9x?
  8. yakken

    Power systems/ Hitec A9?

    It can be done. But from what i seen was when you trim the planes out then take a flight. Your trim might be a quarter inch off. Everytime you correct it and fly when you land they were always off again.
  9. yakken

    Power systems/ Hitec A9?

    You program everything with the eq10. No pc needed.the programmer is built in it.
  10. yakken

    Power systems/ Hitec A9?

    Way easier, cause when you program them it never matches your radio end points when running dual servo setups to get the correct geometry.
  11. yakken

    Power systems/ Hitec A9?

    If u want to program the servos i would go with a eq10. Its mutch easier than programming using the hitec programmer. I have programmed them both ways.
  12. yakken

    Power systems/ Hitec A9?

    Spencer is an awesome pilot [emoji106] . I was just sharing what i have seen with y harnesses.
  13. yakken

    Power systems/ Hitec A9?

    Your also bottleknecking the power supply
  14. yakken

    Power systems/ Hitec A9?

    From my experience the servos dont center right using a y harness. I have also had a few other people have the same issue.
  15. yakken

    Power systems/ Hitec A9?

    What size planes do you fly? No way i would run y harnesses on the bigger stuff.
  16. yakken

    Power systems/ Hitec A9?

    My brother and i run smartfly systems with the a9 on 35 and 40 centers. Thousands of flights no issues.we just switched to the a9x and still running same plane setup
  17. yakken

    Terminology

    Im glad neither one of those planes were mine.[emoji106]
  18. yakken

    Terminology

    Maybe this one
  19. yakken

    Terminology

    Or this one
  20. yakken

    Giant Scale RC Why do this? Seriously??

    Cause i wanna
Top