• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. ericb

    3D Twisted Hobbies Mini MXS-C

    Next is to attach the bottom of the vertical fuse. I use the dry method for this also. Only apply the welders to the parts between the holes. Do not put any inside the holes at this time. Use a square to make sure the parts are square to each other.
  2. ericb

    3D Twisted Hobbies Mini MXS-C

    While everything dries, I set up the electronics and got the servos centered. I am using the Power Combo from twisted hobbies on this one.
  3. ericb

    3D Twisted Hobbies Mini MXS-C

    Next on the list is the control horns. There are 3 different sizes. 2 large ones for the ailerons, 1 medium for the rudder, and 1 small for the elevator. Since all of the assemblies are flat right now, this is a very easy task. Put some welders in the hole for the control horns. Insert the...
  4. ericb

    3D Twisted Hobbies Mini MXS-C

    Next is to glue the rudder onto the top of the vertical fuse. Use the dry method for this and it goes very quickly.
  5. ericb

    3D Twisted Hobbies Mini MXS-C

    Next the vertical fuse needs to be cut in half. There are little notches right down the middle to assist in this. You can use a straight edge if you like, but with the notches, it was very easy without one.
  6. ericb

    3D Twisted Hobbies Mini MXS-C

    Next is to put the spars in the wings and elevator. The wing spars are 2 pieces that must be glued together. Use a small amount of CA to glue the 2 together. Next you cut the openings using a razor blade. The openings are marked on the wigns and elevator. To glue them in, I put welders...
  7. ericb

    3D Twisted Hobbies Mini MXS-C

    First assembly item is to glue the wings and horizontal stab onto the fuse. I use the "dry" method for this. I put welders on the end of the wings and h-stab. I press the edges onto the fuse and work the glue a little and then pull apart and let dry for a couple of minutes. After a couple...
  8. ericb

    3D Twisted Hobbies Mini MXS-C

    I picked one of these up and thought I would do a build thread, so here goes. I will try and be detailed so others can use it like an assembly manual also. Here is what is in the box. I forgot to take a pic of the fuse, wings and h-stab before I stuck them together. First thing is to bend...
  9. ericb

    Real Flight 7.5...

    That will be awesome.
  10. ericb

    Real Flight 7.5...

    Nice.:dancing-poop:
  11. ericb

    I have the power! ...or do I?

    Your argument against it doesn't seem to hold much water. It is a transmitter you like, has the same amount of switches as the DX9. Basically the same features. The biggest thing you are gaining is the ability to control more channels. So basically it fits all the needs you have and is a lot...
  12. ericb

    Hello all...new friends and old I am Mike Chandley aka Fireball

    Welcome. This is a great site with a great vibe.
  13. ericb

    3D 52% Edge 540 vs slick 540

    Heck, that right elevator looks OK.
  14. ericb

    SupaSanta's Christmas in the NW!

    I thought santa would be better at doing the Robot.
  15. ericb

    Real Flight 7.5...

    It's on.
  16. ericb

    Members, If You Want to Help Out - Sponsor GSN!!

    Oh yeah.
  17. ericb

    Real Flight 7.5...

    Now
  18. ericb

    3D to iBEc or not to iBEc that is my question

    Yup. That was not good.
  19. ericb

    Sport PAU 27% Pitts Challenger Build/Review

    Looks awesome
  20. ericb

    This made me happy for fedex to run today!

    How did you manage to get a limited edition one?
Top