• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. K

    DM 5335 (50cc size Electric) made by Subsonic Planes

    Also, I should mention that so far with a 24x12 prop, 4900 watts were recorded at 7200rpm, this was recorded with a data logger on the castle edge. Manta should chime in later today or soon with better insight on this.
  2. K

    DM 5335 (50cc size Electric) made by Subsonic Planes

    First off this has been a long time coming, but is finally here :pompom: The 5335 was designed around the 4325 concentric bearing concept we designed several years back, but with a few extras. The 5335 uses a through shaft that is 8mm steel instead of a bolt on hub as well as a 6mm thick...
  3. K

    12S power systems ideas and options

    I think 14 turn will get it to 185Kv, 206 is 12T and 195 is 13T 14T will be a pain and probably have to charge $45 for the rewind, it will be about 15' of copper per phase 168 turns for the entire stator and probably an hour or more just to wind it, but I'll do it :) Just shoot me an email when...
  4. K

    12S power systems ideas and options

    I bet :) thanks, Ken
  5. K

    12S power systems ideas and options

    I've done some 4330 12s motors that will run 3000 to 3200 watts. The 216Kv with a 20x8 was hitting 72amps and 3200 watts using 2 2600 glacier 30C packs. The 195Kv and a 21x10 would probably be the same watts. Maybe a lower Kv of around 180 would work well with a 22x10
  6. K

    12S power systems ideas and options

    Motrolfly 5335 update: Found out that these are not in the shipment coming to me today or tomorrow. I made a few small changes and that has held thing up. One of which is the prop washer, as you can see in the picture it is rather thin though it does not do much but make a template for drilling...
  7. K

    3DHS 70" Velox

    You are correct I only charge extra if it's a wind I've not done before and not sure exactly what it will take. I know what turns and size wire it takes to get the 425 now so no extra charge for that. All 3615 and larger motors are hand wound so if I've done a special Kv for some one once I...
  8. K

    12S power systems ideas and options

    I guess your Bro as well :)
  9. K

    12S power systems ideas and options

    Manta, I'm your friend and nothing else thanks wedoitall, I couldn't think of anything else, my boss years ago used to call me that though and made me laugh so I used it :)
  10. K

    12S power systems ideas and options

    Gyro been poking me with a sharp stick to post so here goes :D I'll try to start a thread soon as well, Prototype 5335 is doing well with peak watts of 4900 using a 24x12. Both sets of packs were a bit tired so new Glacier 5300 35C packs are being ordered and hope to have some better data in...
  11. K

    The 3DRCForums -Discuss Anything Thread-

    5 posts, I'm ex-hosted, time for Bed :D
  12. K

    The 3DRCForums -Discuss Anything Thread-

    Glad to be invited :)
  13. K

    The 3DRCForums -Discuss Anything Thread-

    FireFox did it I'll look at it later
  14. K

    The 3DRCForums -Discuss Anything Thread-

    Gyro, saw the message pop up, but couldn't open, said it may have been blocked by my pop up blocker, didn't stay up to check and see though. Have to go now, have fun:cool:
  15. K

    The 3DRCForums -Discuss Anything Thread-

    I'm in
Top