• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. K

    Katana 50 from Hangar nine set up

    I'd love to Dadstoysbg. We'll have to see if it is in the budget. I am attaching photos of my katana And my son's super sportster 40. Looks like a fun summer. I took the katana out again and got this photo. Flew it, and had a ball. Thanks again for all your help.
  2. K

    Katana 50 from Hangar nine set up

    Hello Again! I took the katana on the maiden voyage yesterday. It was perfect, flew great and flies like it is on a track. I went to a local field, and as I was pulling in the drive I saw a gentleman who taught me to fly rc helicopters flying one of his scratch built models. I said to my son...
  3. K

    Katana 50 from Hangar nine set up

    Hi everyone, well I'm all done, and have it programmed thanks to all of you. I was trying to adjust the controls with "servo setup" on my radio and messing with the travel. I found that not to be correct. I went in to the d/r expo setting of the radio and I now understand everything you have...
  4. K

    Katana 50 from Hangar nine set up

    Thank you Econpatric and Gyro! I did not see page two of the replies when I posted earlier. OK so here we go, I will NOT tie the rudder in with other surfaces and just leave it at max throw. I only have 2 settings on the 7S so I am limited there however, I will set #2 for the high rates and...
  5. K

    Katana 50 from Hangar nine set up

    Yes it does, thank you. My Spectrum 7S has two rate selections. I would like to tie the elevators and alierons to the "flight condition" 1&2 switch. I would then leave the rudder on the rudder D/R switch, seperate from the others. That way I can have the airplane flying in flight condition 1...
  6. K

    Katana 50 from Hangar nine set up

    Well I'm back again my friends. I have all the radio eq. set in the Katana and I'm almost done with the build. I now need to set my control surface throws. My question is, How do you do the low and high rates? Do you set the low rates by adjusting the servo travel limits for flight condition 1...
  7. K

    Katana 50 from Hangar nine set up

    Perfect! Thanks guys, I appreciate it. I will have no trouble returning the "Y" harness with the reverser circuitry in it.They love me at my LHS (i spend enough). I have flown rc helis for years but now my 13 year old son want to fly planes so I'm getting back in to them. I have to admit the...
  8. K

    Katana 50 from Hangar nine set up

    Thanks guys I appreciate it. The guy at the local hobby shop sold me a "Y" harness with a built in reverser. He said to plug in the servos to the harness and plug the harness in to the elevator input. The reverser on the harness can be set and fine tuned to get each servo perfectly matched. Does...
  9. K

    Katana 50 from Hangar nine set up

    Hi Everyone I am a newbie here to 3d plane flying. I have a Katana 50 from Hangar nine and I need to know how to deal with the two servos on the elevator of the plane. I have a Spectrum dx7s transmitter. Is this plane designed to use mixing on the elevator? If so how do i set that up. Also some...
Top