Extreme Flight Owners Thread

[Enterprise]

It did develop a crack in the case, that has been warranty replaced. Just mounted the rebuilt one and will be breaking it on Saturday I hope. I am running a Xoar 25 3DA for break in. The main issue with this motor and the DA-70 is that there are no good Carbon Fiber props yet for it. The 26x8 is a hovering and harrier machine, but it does not spool up for speed. I can run a 24x12 to get a ton of speed, but then it will be harder to do high alpha stuff. A 25x10 or 25x9 would be perfect I think, but the only CF one out there is Biela, which is my experience is a higher loaded prop and won't be to my liking

 

[cwojcik]

Finally got my 60" Laser video done

[video=youtube;4mv8XkaneBg]http://www.youtube.com/watch?v=4mv8XkaneBg[/video]

 

[Louisvilleflyguy]

Has any one heard news when Exteme Flight is going to get the power combo back in the Torque 4016 and the Airboss 80A ESC? I've been waiting for six weeks now so I can finish up my 60" Extra 300.

 

[Feral]

Finally got my 60" Laser video done

[video=youtube;4mv8XkaneBg]http://www.youtube.com/watch?v=4mv8XkaneBg[/video]

Sick Cody. The laser looks sweet in the air

 

[ryan_m]

Has any one heard news when Exteme Flight is going to get the power combo back in the Torque 4016 and the Airboss 80A ESC? I've been waiting for six weeks now so I can finish up my 60" Extra 300.

Motrolfly 4315-480 w/lightened backplate, and a ZTW Gecko 85 are about the same price as the combo, and work just as well... and are available now. Also it won't stutter when starting the prop from a dead stop like the Airboss does. That drives me nuts.

 

[gyro]

Motrolfly 4315-480 w/lightened backplate, and a ZTW Gecko 85 are about the same price as the combo, and work just as well... and are available now. Also it won't stutter when starting the prop from a dead stop like the Airboss does. That drives me nuts.

That's the combo on my laser, works great, plenty of power, doesn't get too hot.

However, the Airboss/Torque combo are a perfectly excellent option, and work great. To fix the stutter, add an idle up for the throttle, so the prop doesn't stop entirely.

G

 

[CHQ28]

Agree with the two above posts, you won't be disappointed with that set up. I'm running it on my 64 MXS.

 

[dth7]

Finally got my 60" Laser video done

[video=youtube;4mv8XkaneBg]http://www.youtube.com/watch?v=4mv8XkaneBg[/video]

As usual, great demo of a great airframe Cody. EFs 60" "Papi plane", a DH that puts out when you need it. Go Sox!

 

[Luv3d]

Finally got my 60" Laser video done

[video=youtube;4mv8XkaneBg]http://www.youtube.com/watch?v=4mv8XkaneBg[/video]

Great video Cody! spectacular control- inspiring to see those rapid transitions and the energy addition you have with that 15x8! I have to admit, I've been hung up on flying 16x7's on these planes, but I really like the way you open up the sky with your style and may try that on my MXS.

The soundtrack is fantastic too- looks like itunes just made some more cash!

 

[cwojcik]

Thanks guys!

Great video Cody! spectacular control- inspiring to see those rapid transitions and the energy addition you have with that 15x8! I have to admit, I've been hung up on flying 16x7's on these planes, but I really like the way you open up the sky with your style and may try that on my MXS.

The soundtrack is fantastic too- looks like itunes just made some more cash!

I always ran the 15x8 on my MXS and loved it. I might try a 16x7 at some point on the Laser to get a bit more pull and a little quicker roll at low speed.