• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. claymin

    Help! Identify this hardwdare?

    The servo arm and servo center support are from the JR line the rest look like Rocket City hardware . I have used them on several planes with 8411 servos
  2. claymin

    Sport Super Giant Lazy Ace

    So I decided to take a break from some of the other projects in the shop , After losing my scaled up solution X over the winter, bad part it was a total loss. Enough said about that , Any way I have decided to bring back an oldie. I have had the drawings put up for years. I flew one back in the...
  3. claymin

    Alert! CALL TO ACTION: FAA threatening new regulations!!!

    Sent mine tonite
  4. claymin

    Sport Design Build

    These are the Dubro 8" threaded lightweight wheels. I tried the 7" sullivan Large skylite wheels that I had on my scaled up Weeks Solution X they look a little small on this one. Wing rib for the next fall project. hopefully after the design stage. I am getting ready to start installing radio...
  5. claymin

    Sport Design Build

    Side views of the project. You will have to excuse the cluttered shop. working multi-able projects at once. starting to use the X10S radio.
  6. claymin

    Sport Design Build

    Well it's been a while, work has got in the way again. finally have the wings fitted to the fuse, been working on the LED wing lighting,
  7. claymin

    Discussion Taranis Discussion Thread

    I also have been using the X9D+ for a couple of years. being a programmer I love the open TX program. just bought the X10S first of the year. Use it with the stock program for about a week then flashed it over to open tx. Von
  8. claymin

    Scale 50% Dalotel 165

    Merry Christmas to you also
  9. claymin

    Sport Design Build

    Just weighted it. fuselage,wings cowl,wheels without engine,covering,radio and scale accessories. 35lbs I am still hoping for the 55 to 65 range. Roger you may be right it can easy make the 100 pound mark. Time will tell. I am looking a LED light for the wings and a strobe for the rear.
  10. claymin

    Sport Design Build

    Cowl ready to be taken off the plug, once I have removed it I will glass the inside with 6oz cloth. Out side will then be filled and sanded,more filling and more sanding
  11. claymin

    Sport Design Build

    Cowl Plug completed, last coat of paint. I will let it dry until this week end, then it's time to start laying some fiberglass cloth.
  12. claymin

    Sport Design Build

    First coat of black primmer on the the cowl Plug. Hopefully will finish sanding, and adding another coat of primmer this evening
  13. claymin

    Sport Design Build

    Main wheels came in 8" Du-bro
  14. claymin

    Sport Design Build

    Mounting wings to the center section. some small adjustments to be made. Will be adding wing tip after wing fitting, from tip to tip will be 198'
  15. claymin

    Sport Design Build

    Left wing panel being laser aligned before sheeting installed. Already completed this with the right panel
  16. claymin

    Sport Design Build

    I haven't give up yet. have some many project going on. Having to build a new left wing panel. When I laid the first panel out it I ended up with a twist in the wing panel. Could have repaired it but as big as this plane is going to be did not want to risk a failure.
  17. claymin

    Sport Design Build

    Thanks, I have a DLE 170 not doing anything right now, But I quad 222 is going to be the choice, the cool factor, usable weight plenty of room in the fuse for set up.
  18. claymin

    Sport Design Build

    Thanks, going to cut in Eyelets and radiator today, if everything goes right will be finishing the cowl plug this weekend. Then if work :sorry: will leave me alone, maybe I can start glassing.
  19. claymin

    Sport Design Build

    Been working on the Cowl plug, Getting closer to being completed still have to cut out the air inlets and the radiator inlet.
  20. claymin

    Scale Byron Originals UPF7

    tail section horizontal stabs and elevators.
Top