• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Wild man

    I'm going/went flying 2021 thread

    to do it you have to have the Trans. and receiver in the plane on then go to forward programming in the transmitter click on gyro settings, and so on here is a tutorial on how to set it up
  2. Wild man

    I'm going/went flying 2021 thread

    Are you talking about the Draco If so you can go in and program Flight modes on a three position switch. So you can have no AS3X or safe, position 1 then position 2 is AS3X only and position 3 will be both AS3X and Safe or you can set it to where position 2 and 3 are just diferent gyro settings...
  3. Wild man

    I'm going/went flying 2021 thread

    Went out again early this morning at 7:00 am. The wind was not to bad at 10 to 15 on the forth battery a did this video. The wind was up, blowing 15 to 20 gust at 25. The Draco is a fun plane to fly in the wind after every one else goes home even with the AS3X I still had to add a lot of input...
  4. Wild man

    I'm going/went flying 2021 thread

    yesterday I put the first three flights on mine. The first two just after sunset and the third one hour after that. One of the main reasons I got one was to make it a night flyer, and with all the light I am very pleased on how easy it is to keep oriented in the dark with all the lights on. I...
  5. Wild man

    I'm going/went flying 2021 thread

    Took the Draco out for the first Three flights tonight. I am flying it on Smart batteries 6 cell 5000mah 30c G1, and a 6 cell G2 5000mah 50c and getting 10 min. flights The Draco is every thing they make it out to be and then some. My main purpose of getting the Draco is to make it my go to...
  6. Wild man

    I'm going/went flying 2021 thread

    While I was setting the throws for this plane. I noticed the Elevator was not centering when going back to neutral every time when doing the settings. I found that the Elevator linkage was moving the Horizontal stab back and forth in the mounting set up So I made a couple 1/16" shims to help...
  7. Wild man

    I'm going/went flying 2021 thread

    Just received mine today. WOW very impressive plane, and the first thing I noticed is the new EPO foam used in this bird, and the way it is packed is also great. I am going to get it out later and have it ready to fly by tomorrow weather permitting, but the way it looks we are going to have rain...
  8. Wild man

    Awesome Video Thread

    Here is a rather lengthy in depth video of all the guys from Horizon team and the man that actually designed and built the Draco Mike Patey very interesting video of all the work that went in to bringing this to us RC Pilot's to enjoy
  9. Wild man

    I'm going/went flying 2021 thread

    I was able to get out Thursday early and put the test flight on my Flight line 63" F-4U-1A Bird Cage Corsair I got a few photo's with my IPhone X after the test flight
  10. Wild man

    Awesome Video Thread

    I got in on the first batch of the Draco. Preorders. I should be receiving one around April 23 They went fast The minute they put it on the Horizon site. I did the preorder and by late afternoon they were out of the first batch and it went to Back ordered I can't wait to get it and see what the...
  11. Wild man

    The 'What did you do in your workshop tonight?' thread

    I am almost done Today I finished painting the 3D printed panels in the Cock pit and glued the Canopy Back in place
  12. Wild man

    The 'What did you do in your workshop tonight?' thread

    I just finished the bottom of the Corsair. I added exhaust trails and gun smoke, still need to add the weathering on the bottom of the wing. That will finish what I am going to do on the bottom. All this has been a first for me. I use to think why spend all that time doing all this, the minute...
  13. Wild man

    The 'What did you do in your workshop tonight?' thread

    I have never installed so many warning, and access labels (decals) on any other plane like this F4U-1A Corsair EVER, there are over 90 some nomenclature decals that I have put on and I still have more to install. Then on to the weathering to finish
  14. Wild man

    The 'What did you do in your workshop tonight?' thread

    We got the flat white on the bottom of the F4U-1A Corsair today now back to weathering and access labels
  15. Wild man

    The 'What did you do in your workshop tonight?' thread

    Sounds great Mike say Hi to him for me The 3D printing is fun but takes a lot of Brain Work to learn. LOL!!!!
  16. Wild man

    The 'What did you do in your workshop tonight?' thread

    Thanks Mike I appreciate the nice comment Sir. Mike I have been meaning to ask you about Decal Dennis, How is he doing these Days ?? P.S. the work on the Corsair continues I taped off the bottom to add the Flat Whit you see on many of the F4U-1A's, Then back to adding more of the Warning and...
  17. Wild man

    The 'What did you do in your workshop tonight?' thread

    I finished the Instrument panel , with a clear circular gun sight, and the two side panels I may split the Canopy and have an open cockpit, might even go as far as to make it a sliding Canopy MAYBE LOL!!!! That's all I am doing Tonight, not the best, but it is close enough for government work
  18. Wild man

    The 'What did you do in your workshop tonight?' thread

    I have been trying My hand for the first time weathering and Detailing my F4U-1A/d Corsair 1600mm
  19. Wild man

    The 'What did you do in your workshop tonight?' thread

    Not the best work I have ever done, but it good enough for government work. I added Cross hairs to the Gun Site for my Corsair
  20. Wild man

    Discussion The I’m Going/Went Flying Thread

    I'm 67 now and still fly no matter what the weather I went out with this Plane just after lunch With my 2.1 Cessna 150 on floats. For got to take my phone, my Wallet, and my GO-Pro to get a hat cam video. But I did remember every thing I needed to fly LOL!!!!
Top