• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    So 3dNater I did as you suggested and sure enough things are messed up. Cowl has 3 cracks in it and the framing is separated from the fiberglass. There are just too many things going wrong for $449. I was willing to deal with the hinge thing, but dang man. The pic is from my phone so it's not...
  2. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Ah to hell with it... I wouldn't be much of a modeler if I can't make a few hing slits would I. I'll just do it myself. Hopefully they get this fixed for others.
  3. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    I made very sure to not miss the slits and took my knife and slid it from side to side on each one just to make sure I knew where the end of each hole is. The other wing is real bad only two holes line up. Rudder and elevon is good to go, just the wings. I have no doubt I can do it, however sh#$...
  4. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    For anyone that now owns this plane, are your hing holes in the ailerons messed up? They are on mine. I have never made one so I don't even know how you do it. Just take a razor knife and cut it? Here's a pic of one and the other is messed up even worse. Totally misaligned. As you can see in...
  5. Bushwacker

    TESTING - Aerobeez 93" EXTRA 330 SC with DLE 111 Twin!

    Perfecto!!! Man that sucker just takes right the hell off and holds it's lines well doesn't it. Great choice of motor and prop combo. Thanks much guy's great video and real nice flying Santiago.
  6. Bushwacker

    ZTW Gecko vs Castle Creations

    Xpress very nicely done sir. Thank you for such great info bro. This really helps me out a ton. Im no stranger to the $$$ I used to run a KONTRONIK Kosmik 200 HV and a Pyro 800-480 in my Goblin 770 and as you know those freaking things are not cheap. Performance is undeniable though and a...
  7. Bushwacker

    ZTW Gecko vs Castle Creations

    True, hey let me know what you wind up doing will ya. Got me curious now. Plus it might help me decide on what I end up doing. ;)
  8. Bushwacker

    ZTW Gecko vs Castle Creations

    Thank you for the info and yes your right those buggers are not cheap are they.
  9. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Okay fella's here's what I have for ya. My 12 old son was a bit scared so he fumbled a bit sorry about that. Second run was all up. http://youtu.be/ZawFUSa0oxE
  10. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    That is exactly what Im thinking because once Im in the air under say half throttle or so it does fine, but down low or coming out of a hover it's bad. Now I know coming out of a hover is harder on the machine to do and changing up the prop can help IE switching to the 18x8, but it still feels...
  11. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    I couldn't tell you right now bud, but I did just get the GT Pro RC module so I will test it out. I cracked the 18x8 prop so I will have to use the 17x10 Power is pretty good up in the higher rpm range but the spin ups are slow. I know this is an issue with the ZTW's. Been reading all about...
  12. Bushwacker

    ZTW Gecko vs Castle Creations

    I know the issue your talking about Mike I have the same issue. Spins up fairly slow and bugs the crap out of me. When I hit the throttle I want to be right now not in five freaking minutes. I have been reading about CC not being the best solution either. I have also been reading that the Master...
  13. Bushwacker

    Joe Smith Flying the 100cc Aeroworks Extra 300!

    Very cool. Best part was the very end getting to see everyone.
  14. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    I have the 3DHS 65" Vyper on a Motrolfly 4320-450 w/17x10 & 18x8 props runs pretty well on that setup, wish it had a bit more power. Don't know what the weight is, but Im guessing it's all of 8.5 pounds. The Slick is about a pound heavier and is why I was considering the 12S option. That and I...
  15. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    HAHA could put put a A80 in it... actually I decided not to go with 12S. It will either be 6 or 8.
  16. Bushwacker

    ZTW Gecko vs Castle Creations

    So I have used both of these brands, however I have only ever used the CC on a Heli. Both work well. The Gecko I have only used on a plane a 65" Vyper with a Motrolfly motor. The CC works great on my Helis but have never ran one on a Motrolfly motor. What do you guys think works best of these...
  17. Bushwacker

    The 3DRCForums -Discuss Anything Thread-

    Sorry for your misfortune dude.
  18. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Meh I just run everything off my main packs and a little Scorpion Backup Gard. Pretty simple.
  19. Bushwacker

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    I'll be running a Motrolfly maybe the 4330-255, already have some Hitec 7954's, but considering a set of Savox servo's. Havent decided on esc yet...either a CC HV or a Gecko HV also don't want run a separate flight pack. Always try and stay away from that if I can.
Top