• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. AKfreak

    Help With Motor Timing and Poor Throttle Response (Gecko 120HV)

    Enterprise thanks bro, they are on the way. I hate to desolder stuff, so I just got the new ones. I cant wait to hear back from Gyro to see how his 120HV worked for him. If it too is lazy to start, I wonder if he can reach out and have ZTW take a look at the firmware.
  2. AKfreak

    Help With Motor Timing and Poor Throttle Response (Gecko 120HV)

    I am telling you this ESC is way way different than the 85, and is different than any of the others I have used on any plane. Its' like it's in full time Soft start mode. BTW, I got my castle 85HV but need to get connectors for it. I reached out to Ken, but no response. Anyone know where I can...
  3. AKfreak

    32" MXS-C! Backyard insanity!

    Please send me one for review. My Crack Lazer needs a brother.
  4. AKfreak

    My New 3D Extra 300 Prototype For Fly-Model

    Reserved III
  5. AKfreak

    My New 3D Extra 300 Prototype For Fly-Model

    Reserved II
  6. AKfreak

    My New 3D Extra 300 Prototype For Fly-Model

    Reserved
  7. AKfreak

    My New 3D Extra 300 Prototype For Fly-Model

    My New 3D Extra 300 Prototype For Fly-Model Hey guys, for the last few months I have been spending a ton of time learning and speaking to many of the top pilots in the world about what makes a great 3D plane. I am proud to announce that I am lucky enough to be working with a factory in...
  8. AKfreak

    64" mxs exp

    My 16x8 falcon is a beast on the my msx
  9. AKfreak

    Determine CG OF An Unknown Air frame (30% TOC Extreme Yak 54)

    Thanks bro. I looked all over the internet trying to find a manual or someone that actually owned one of these plane, but no go. I will do it the manual way. Thanks again, Akf
  10. AKfreak

    St George Utah 3D Bash

    Awesome that is great news. Thanks, AKf
  11. AKfreak

    St George Utah 3D Bash

    Ok guys, I have some guys interested in going, the only concern is the landing fee cost. What's it going to be? They said flat out they aren't going if it's $40 to $50 bucks to fly. Also after listening to the last pod cast, the sponsor prizes are going to be done in a raffle format. Is that...
  12. AKfreak

    Determine CG OF An Unknown Air frame (30% TOC Extreme Yak 54)

    Does anyone have some info on this plane?
  13. AKfreak

    Determine CG OF An Unknown Air frame (30% TOC Extreme Yak 54)

    Hey guys I have a 30% TOC Extreme Yak 54, the company was TOC1 then Aviation Models, then I heard it became Pilot (but Pilot says nope) None the less, I don't have a manual for the plane. I want to get the right CG to start with so I need your help determining the correct location. On a 35%...
  14. AKfreak

    Kim Quenette Top Secret Depron F3P FreeStyle Plane

    http://youtu.be/SZOhhkBdXxk Kim is one bad ass pilot. I am so happy to have him at my local field.
  15. AKfreak

    The EXTRA 300 EXT Build Thread

    Today Kim Quenette took a pull on the Fly-Model Extra 300. I don't think he was too impressed. He is a hot pilot used to flying some of the best models. He did say the setup could be made to work better (and I agree). He liked the servos, but the power was not good, and he was not happy with the...
  16. AKfreak

    Krill 35% extra 330sc

    I want to see some video of this bad boy!
  17. AKfreak

    Help With Motor Timing and Poor Throttle Response (Gecko 120HV)

    Thanks for the 19x10 correction. I set my start strength to 40, I may go all the way up and see.
  18. AKfreak

    Help With Motor Timing and Poor Throttle Response (Gecko 120HV)

    Aeroplayin thanks for the info. He only flew the 20x10, and it was a heavy APC at that. I am getting a 19x8 from Gyro, and I ordered a 20x8, and I have a Falcon 20x10 just in case I fell like testing it. I will soon find out if in fact the Gecko is the limiting factor when it comes to throttle...
  19. AKfreak

    The EXTRA 300 EXT Build Thread

    So the plane is finished and it flys well. It's no 3D monster like the EF MSX is, but it can harrier, and wad up very nicely. I want to thank all who participated in this thread. Your help was invaluable. This plane is just a stepping stone for me and it's now time to reveal what it is. The...
  20. AKfreak

    Best Place to Buy Wooden Electric Props

    Sold!!
Top