Search results
-
The 3DRCForums -Discuss Anything Thread-
My guess is he didn't buy into the Eco Boost hype. I've got a few buddies with Eco Boost F150's, fuel economy is similar to the 5.4L. The only advantage I can see to the Eco Boost is if you're pulling a trailer at altitude, the turbos can just spool faster to make more power when the air gets...- Xpress
- Post #8,805
- Forum: Giant / Scale RC General Discussions
-
Aerobeez 40% extra prototype!?!?!
Negative! Biggest airplane I've flown! Rest assured, if you can fly a 30% or 35%, this airplane is no different, just bigger and hurts the wallet a little more if you crash ;)- Xpress
- Post #10
- Forum: Aerobeez.com
-
Aerobeez 40% extra prototype!?!?!
Yes, as I said in my first post I got to fly it for a few minutes ;) It tracked straight as an arrow, no coupling I could find. Santi had it setup for IMAC when I gave it a try so I couldn't fly much 3D with it, but it was super stable in any attitude I put it in from high alpha in any...- Xpress
- Post #8
- Forum: Aerobeez.com
-
Aerobeez 40% extra prototype!?!?!
12 servos for the control surfaces, 3 on each aileron, 2 on each elevator, and one on the rudder Bipenut I think Nick definitely designed the graphics for it, that has his name all over it ;)- Xpress
- Post #6
- Forum: Aerobeez.com
-
Aerobeez 40% extra prototype!?!?!
It's actually more like a 45% sized airplane. It's stupid light, flies like it's on rails, zero coupling everywhere, easy to hover. Santi has a DA-200 on the nose on cans (the thing is UBER smooth!!!) with Hitec 7980's all around with the JR X-Bus system onboard. Very light flying airplane even...- Xpress
- Post #3
- Forum: Aerobeez.com
-
The 3DRCForums -Discuss Anything Thread-
Not with a 5.2L. The wind noise just gets unbearable, especially with the windshield lightbar :veryshocked::banana:- Xpress
- Post #8,803
- Forum: Giant / Scale RC General Discussions
-
Xpress does a BANSHEE build...
Last night I managed to get the left wing all done up. Aileron hinged and sealed up, ready for the control horn and a servo to go into it. Somehow I managed to get a nice slice in the top of the wing root that cut through the covering, not sure what could have done that :facepalm: For those...- Xpress
- Post #39
- Forum: Aerobeez.com
-
The 3DRCForums -Discuss Anything Thread-
That's why I stick with a Jeep. It lets you know when you're going faster than 75 :cool:- Xpress
- Post #8,801
- Forum: Giant / Scale RC General Discussions
-
Joe Hunt RC 3D FLY IN -- Pics & Vids
Everybody: Fly lower!! Joe: Fly higher!! That's Ben 'Jamin' Mackles and his 3DHS 87" Extra 300 SHP.- Xpress
- Post #78
- Forum: GSN Event Coverage
-
Aerobeez "BANSHEE" 91" Slick build
Okay, finally got some time to get down into the shop tonight. Only had enough time to get one aileron hinged and sealed up but progress is progress. Also have some more SWB and Fromeco bling sitting on the bench, ready for install. Hoping to get the other wing finished up tomorrow, then at...- Xpress
- Post #55
- Forum: Giant / Scale ARF Build Threads
-
Joe Hunt RC 3D FLY IN -- Pics & Vids
Where's the rest of the videos @Joe Hunt ???? :mario-banana::banana-dance:- Xpress
- Post #67
- Forum: GSN Event Coverage
-
The 3DRCForums -Discuss Anything Thread-
- Xpress
- Post #8,788
- Forum: Giant / Scale RC General Discussions
-
The 3DRCForums -Discuss Anything Thread-
How low can ju go mehn?- Xpress
- Post #8,786
- Forum: Giant / Scale RC General Discussions
-
The 'What did you do in your workshop tonight?' thread
Tightened up some more covering on my 91" Slick, sometimes I really hate working multiple layers of covering!- Xpress
- Post #2,211
- Forum: Giant / Scale RC General Discussions
-
Joe Hunt RC 3D FLY IN -- Pics & Vids
How low can you go? :oblong::D- Xpress
- Post #61
- Forum: GSN Event Coverage
-
Xpress does a BANSHEE build...
Small update for tonight, went over all of the covering again in the event I missed some. No new pictures just yet... More will come tomorrow.- Xpress
- Post #38
- Forum: Aerobeez.com
-
Secret Footage of 3-D Printed Engine Baffle Process
I laughed louder than I should have :lol2:- Xpress
- Post #8
- Forum: Giant / Scale RC General Discussions
-
Joe Hunt RC 3D FLY IN -- Pics & Vids
Yeah she posted the pics @cbarnes0061 :LOL_gif: She has lots more. There are over 2000 photos just from a short couple of days!- Xpress
- Post #44
- Forum: GSN Event Coverage
-
Joe Hunt RC 3D FLY IN -- Pics & Vids
Stay tuned, we have MORE!!!!- Xpress
- Post #29
- Forum: GSN Event Coverage
-
Real Flight 7.5 Planes
Takes a lot of editing of the current models to produce anything close to the real thing, along with tweaking of the physics.- Xpress
- Post #3
- Forum: Flight Simulators