• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

New Product Pilot- 26% Edge 540 V3 Hamilton ARF DUE DECEMBER!

Xtreme_Power_RCS

Staff member
14570546_882848685148714_4571337221168698386_o.jpg


Everyone who has watched the RedBull Air Racers should be very familiar with Nicolas Ivanoff. Nicolas Ivanoff is a French pilot and instructor, born in Ajaccio (Corsica) on July 4th 1967. He started Aerobatics at the beginning of the 1990s and by 1997 he was already a member of the French Aerobatics Team. Every year since then, he has consistently finished in the top 10 in various aerobatic competitions, be it European or World Championships. Considered as a French leading pilot, the Quick Corsican, as he’s called, joined the Hamilton team as the brand ambassador in 2005, since then he’s flying the world in his Hamilton branded aircraft. Performing every season at international official competitions, but also giving strong emotions to the audience of various Air Shows worldwide.

Pilot has now replicated this Beautiful air craft that Nicolas flys in not only for the Giant Scale flyers, but has now made one for all of us 30cc junkies! Introducing the
Hamilton Edition 26% Edge 540 V3.
2622528206.jpg
2621604635.jpg
103497020.jpg
103524512.jpg
ed92f_1.jpg
262725207.jpg
2016918234936249.jpg
262796559.jpg
262884220.jpg
262976460.jpg
262875255.jpg


Pilot RC 26% 78" Edge 540 V3 50-60cc Hamilton Carbon Fiber ARF Gas Airplane
  • Strong Lightweight Construction
  • Designed for 3D and precision aerobatics
  • Covered in Oracover(Ultracote) from Germany
  • Fuselage is set up for canister installation
  • Cowl with cowl ring, no exterior screws exposed
  • Complete hardware included
  • Removable wings and stabs
  • Removable rudder
  • All control horns included
  • Laser cut engine mounting templates
  • Push-Push rudder system, rudder servo is on the rear of the fuselage
Important note: The CG of EDGE 540 is not on the rear of the wing tube. Check this CG mark inside of the fuselage.

High Pre-Installation:
  • Pre-Hinged Wings, Stabs, Fin and Rudder
  • Pre-Installed Fuel Tank and Firewall
  • Pre-Mounted and Painted Canopy
  • Pre-Installed Pull/Pull Wire with Ball Links on Rudder
  • Pre-installed Push Rods with Ball Links
Carbon Fiber Accessories Included:
  • Wing tube
  • Stab tube
  • Landing gear
  • Tail wheel
  • Spinner
    • Wingspan: 78 in(1.97m)
    • Wing Area: 1082sq in(6980 sq cm)
    • Fuselage length: 70.6 in(1.79m)
    • Weight: 12.98 lbs(5.9kg)
    • Engine: 30-40CC

    If your looking for a BEAUTIFUL air frame and fly like Nicolas out at the field, this this is for sure a plane to get and if GUARENTEED to turn heads out at the field. Roman Paryz, Known as Rpflyingtaz on GSN, had one of the Giants out at the field and it was an attention getter and a non stop photo magnetic! He had nothing but good to say about this bird! Pilot really out done them self on this one!
Price- $419.00

For more info about this ARF, Visit Chief Aircraft



Nicolas Ivanoff

jpk_5231-crop-u89031.jpg

jpk_0219-crop-u63593.jpg

 

Larry B

70cc twin V2
I would have to argue that, my favorite scheme is that of Martin Sonka with his Red Bull Edge 540 V3. I got a great photo of Martin signing his autograph for my wife Brenda.

P1010054.JPG
P1010049.JPG
 

Larry B

70cc twin V2
Your photo's look just fine to me. Your right, we must have been within arms reach of each other right across from Matthias Dolderer's hanger!

Brenda and I also got Kirby to sign our Red Bull air race hat which was cool, so now I can were that when I fly my Edge 540 in it's Red Bull scheme.

P1010061.JPG
 
Top