• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. ghoffman

    Extreme Flight 104 Extra 300

    Magnets usually don't work on gassers due to the vibration.
  2. ghoffman

    Tech-aero IBEC question

    I just use double sticky Velcro to mount it, it is very lightweight and the foam wrap and zip ties is overkill.
  3. ghoffman

    Extreme Flight 104 Extra 300

    It is printed and ties the 2 screws together.
  4. ghoffman

    Extreme Flight 104 Extra 300

    I have a new, smaller vehicle as my daily driver, a Chevy Equinox so I am going to have to take the stabs off and on to transport it. This precludes Locktite etc. I'm worried about the M3 stab screws backing off. Here is a possible idea, with a printed and epoxy'ed plastic knob over a M3 socket...
  5. ghoffman

    Share your Trailer Ideas Here

    Yes. I have not done the Solidworks or Inventor model ( I have both) yet.
  6. ghoffman

    Share your Trailer Ideas Here

    I will print some up and pull test them.
  7. ghoffman

    Share your Trailer Ideas Here

    I can sure. I changed it a little so that the bungee mount is on the side of it.
  8. ghoffman

    Share your Trailer Ideas Here

    I will get a trailer soon. I will print these wheel chocks with bungee mounts for it.
  9. ghoffman

    Extreme Flight 104 Extra 300

    On the others I make, the hatch is rectangular so you can mount it box up or down. The EF has a tapered front edge so it is not reversible. I could make an "up" version for anyone with a couple of mouse clicks if requested. DLE versions as well.
  10. ghoffman

    Extreme Flight 104 Extra 300

    You could Dremel or drill it to be that way, ABS is pretty machinable and the flat plate portion is completely solid. The ignition box holder is honeycomb though.
  11. ghoffman

    Tech-aero IBEC question

    I run the same setup, probably the connections. I'd recommend you call Ed Alt at Tech Aero and discuss it with him.
  12. ghoffman

    Extreme Flight 104 Extra 300

    OK, I will print some tonight. The best way to get a hold of me is gshoffman@comcast.net
  13. ghoffman

    Extreme Flight 104 Extra 300

    I printed an integral ignition box mount/engine box hatch cover.
  14. ghoffman

    German DA Dealer and DA MODIFIER?!?! 6 Cylinder?!?! 4 Cylinder DA-140?!?!

    Hey, Rc planes are cheaper than slow horses or fast women.
  15. ghoffman

    German DA Dealer and DA MODIFIER?!?! 6 Cylinder?!?! 4 Cylinder DA-140?!?!

    The 4 cylinder 140 is nice
  16. ghoffman

    Secret Footage of 3-D Printed Engine Baffle Process

    That is funny but close. Here is it printing some servo tester mounts.
  17. ghoffman

    Extreme Flight 104 Extra 300

    My printer is repaired and I am shipping the baffles again for the EF 91 and 104, (and soon for the AJ Lasers). They are made from high temp ABS and are available in red, white , blue, black, and grey. Please me at gshoffman@comcast.net.
  18. ghoffman

    91" Extra 300-EXP ARF

    It is back up and working great. I just printed up some 104 baffles and servo tester mounts. The best thing is to email me. Gshoffman@comcast.net
  19. ghoffman

    Savox servo torque test

    Will do. You can see the printed parts I used for the servo test rig. The servo mount only requires one screw to hold the servo for a test.
  20. ghoffman

    Savox servo torque test

    With the 3s setup I use they will get 8.5v all day, until the batteries are completely dead of course. If I ran a 2s setup then I would set them at something like 7.4v. I have been running this setup on 2 planes most of all last year.
Top