• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Always nice to get the plane sitting on it's front paws and hind leg.
  2. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Best tool I found to remove the old fabric cement is a pin stripe removal tool ,even works on the balsa. The left aileron on the top is ready for fabric, made the lightening holes larger and replaced the 1/4" thick balsa rib sections with 1/4" x 1/8" spruce, the screws didn't work well in the...
  3. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Finished cleaning off the right wing yesterday, what a pain getting the screws out since I had filed the heads down to reduce the height when it was originally covered. The original screws were slotted, had to re-slot a few where the filing was aggressive. The new screws are button heads with...
  4. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    I have used cf arrow shaft for bottom fuselage stringers on several builds, straight and strong.
  5. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Now there's a nice selection of clamp sizes!
  6. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Does the threaded end get glued into the arrow shaft?
  7. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    That's pretty typical, I bought a 4x8 sheet from Eplastics and had them cut it into 6 24" x 32" pieces. They shipped it rolled so shipping wasn't too bad. What size are looking for? I can get is and mail to you if you like.
  8. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The ribs are 1/4" x 1/8" Sitka spruce. I think you will be fine once covered. The tips are basswood, it is almost finished, had to quit for a while, sanding was boring me to tears. I used Titebond III to laminate the bows, that adds to making the sanding more difficult. Might be ready for...
  9. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Just a short update, last season I damaged the left wing while experiencing pilot induced isolations. While recovering both wings I am correcting a couple of errors in the build. The plans show the leading edge sheeting ending at the last full rib while the service manual shows it ending at...
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    The last two molds until the fuselage is painted and ready to mold. Making a mold for the main wheels so that that they will get laid up with KEVLAR, plan to put the hard points in while laying up the pants, one right, one left. The other plug is the revised main gear fairing. Have the Champ...
  11. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    You doing great!
  12. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Take something out when you put something in!!! Looking good.
  13. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    To mount the nose pant, .100 thick disc were silver brazed to both sides of the fork, these were drilled tapped for 4-40 threads. 3/4" aircraft plywood disc were counterbored to allow the the dipping washers to push the pant material into the counterbore of the plywood with a epoxy/milled fiber...
  14. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    Looks to be a diverse selection of models. Didn't realize you southern folk had basements?
  15. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    I don't see the fuss over Hysol, maybe someone that has used it can shine some light on the subject. Seemed like the guys that built Cardens were high on it? Your firewall still looks thick. Is that carbon tape on the side?
  16. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    David, You mentioned Hysol, what is the cure time for Hysol? I'm too cheap to use it! I really could never see the benefit verses the cost, if I need a nice fillet, mix up some epoxy and filler , dispense with a monoeject tube.
  17. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    I use hex head servo screws for many gluing applications, remove when cured.
  18. TonyHallo

    Scale 112” - Taylorcraft by HeyLuc & Snoopy.

    Screws
  19. TonyHallo

    Scale Mick Reeves 1/3 scale Tiger Moth

    You'll need it tomorrow!
  20. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    No problem Snoop. Pulled the nosewheel pant out of the mold. 1 layer of 2 ounce cloth and 1 layer of four ounce cloth, these were laid up and trimmer while green flush to the mold. After curing the inner surface was lightly sanded with 80 grit. Six ounce KEVLAR was fitted 1/4" below the part...
Top