• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. stangflyer

    30cc gasser prop suggestion

    He has purchased an RCG 30cc. If it is anything like the 26 and the 50 I myself owned, it should prove to be a great little motor. My 50 ran as good if not better than most other high end 55cc motors at our field. It would turn a 22x10 Mejzlik 3 blade at 7000 on the ground. It made my old Great...
  2. stangflyer

    30cc gasser prop suggestion

    Hey everyone, I didn't see any info. here so I will post this question in hopes some of you out there might have a little better input than what I am finding. I am doing a build for a friend on a Hangar 9 Cirrus 96" wingspan. It is going to be running a 30cc gas engine. Because my friend is a...
  3. stangflyer

    Rudder servo arm

    Awesome idea. It just might be the ticket we all have been wanting. Heck, you might be able to mass produce them for a small profit. Of which will be dedicated solely to the purchase of new planes or parts....!!!!
  4. stangflyer

    Rudder servo arm

    Yep..that's the one. (http://www.espritmodel.com/servo-arm-remover-for-v1-secraft-arms.aspx) Not sure if you need to slide in on one end or another, but one would think with the way Seacraft designs their servo arms, they would have taken that into consideration. My thought is: Like many of the...
  5. stangflyer

    The I'm going out flying thread 2016

    Only 3 flights today? That's it! No cookies and milk for you.  Sure hope the wind does not "howl" tomorrow. I gotta date to punish my Lil 260. Been too long....
  6. stangflyer

    Rudder servo arm

    I forget just where, but I saw a servo arm puller listed on a site once. Now where was that? 
  7. stangflyer

    DA250 4 stroke

    Let's see now.... 250cc vs. 170cc., four stroke sound,  gargantuan bottom end torque.... I want one!!!
  8. stangflyer

    The I'm going out flying thread 2016

    Ya'll know what really bites? Ya stay up late getting your batteries charged so you can go fly in the morning. Then you wake up and find the wind is blowing like Mach9 and needless to say, it puts a ki-baush on the whole flyin' thing. And I was so looking forward to putting a beatin' on my...
  9. stangflyer

    Rudder servo arm

    Yep that is my process now but I have not found a open end wrench to fit.  Thanks LOL....I have done this too.... Also have taken the servo arm back off to tighten the nut as Eric has done. 
  10. stangflyer

    Rudder servo arm

    Funny you should ask this very question. Two nights ago, I changed out my rudder servo arm on my Pilot Edge. I had good throw, but I wanted "MORE"....hee hee. Anyway, I have always used the lock nut on the bottom side of the arm. I remember saying to myself, this really is a  PAIN IN THE A$$...
  11. stangflyer

    Measuring throws on control surfaces

    Voice of experience...???? (Giggling quietly)
  12. stangflyer

    3D PAU 100cc EXTRA 300sp

    Very impressive. Really like that plane!!!
  13. stangflyer

    IMAC Dalton 300 ml build thread.

    I've been following along your build thread. All I can say is, VERY NICE! It almost makes me want to build another stick plane. Ummmm, yeah not so much. My patience is pretty much worn out. I will just keep tabs on yours. Sweet plane....
  14. stangflyer

    IMAC JTEC/ Radiowave 3.1m competition series

    Freaking amazing... !!!
  15. stangflyer

    The I'm going out flying thread 2016

    You know there is something seriously wrong with your logic or maybe it is just simply coursing through your veins.... I mean, 2:00 a.m. and waiting for Lipo's to finish charging just so you can go fly in the morning? Wow....
  16. stangflyer

    New products @ Tail Dragger Rc

    I bought two hand crank units at the beginning of last year. So far they are holding up pretty good. I expect come spring, there is gonna be a big change to my gas can. I'm older now, let the batteries do the crankin' 'stead of my arm. LOL Same here...I have a 1500cc tank in my Yak and it...
  17. stangflyer

    HOWDY from Iowa city,Iowa

    Oh goody, goody, goody.....another one we can pick on. This is getting good..... Welcome Ron... good to have you! 
  18. stangflyer

    DA-85 prop

    That video is some good stuff. I love watching vid's like this.
  19. stangflyer

    DA250 4 stroke

    Well come on man.... Don't ya know there are guys standing in the cold waiting for this motor? Seriously, I would love some info. on expected prop sizes and rpm numbers. I loved my Big Jug Saito's when I was flying glow. Would love a big ole' DA four stroker.
  20. stangflyer

    DA250 4 stroke

    Ahhhh...... now I can have sweet dreams. Wouldn't it be cool to have like..oh I dunno.... ten or eleven of these all up and running in air frames? hee hee
Top