I am changing mine to use the MPX connectors tired of fishing wires aroundLooking forward to seeing how you're gonna secure the lower wings. As for the wing wiring, I used PC plugs for mine, which worked awesome. A bit of a PITA to setup but worth it in the end.
View attachment 42681 View attachment 42682
Looking forward to seeing how you're gonna secure the lower wings. As for the wing wiring, I used PC plugs for mine, which worked awesome. A bit of a PITA to setup but worth it in the end.
View attachment 42681 View attachment 42682
Looking forward to seeing how you're gonna secure the lower wings. As for the wing wiring, I used PC plugs for mine, which worked awesome. A bit of a PITA to setup but worth it in the end.
View attachment 42681 View attachment 42682
I feel like if the wing wiggles loose you have way to many other issues and are probably about to crash... The wings on the beast fit pretty tight and with the I struts and both bottom wing tubes and 2 wing bolts it's pretty secure... But if it was to work its way loose I would think that you would be able to land no problem with the top ailerons.. The servo with no power should blow to center and you would be able to land with no issue.What happens if your wing or pc connector wiggles and you loose servo control? I also worry in this area that the plug in is difficult to line up.
Well I guess instead of risking a report I'll just like that last lineI never had any issues with these plugs on my Beast. Once aligned they stayed that way. You do need to remove the small "crimp" on the female socket so the male slides in without resistance.
Oh boy, I'm asking for trouble there!