3D BH Design 50% Edge 540

[stangflyer]

DAYUMMM I thought you were just doing the checkers. SUB"d

Just the checkers.... And because of a few repairs in the sides, plus some patches....And I wanted to change the air exit in the bottom of the fuse...I decided to just strip the fuse completely. Going to make is so much easier. And really, not that much more expensive for covering.

 

[pawnshopmike]

Can't wait to see the new scheme come together. This will be fun.

 

[stangflyer]

Can't wait to see the new scheme come together. This will be fun.

Thanks..... It will be pretty straight forward and not too elaborate. It will go back to the original blue on the bottom with the white through the center. The top however will be Missle Red to match the top of the forward hatch and wings. But I am thinking of a way of breaking it up just a little so that it is kind of....mmmm, eye catching. Open to ideas and suggestions. Anyone?

The revision to the bottom will have some cooling vents built into it. Though not identical, but something similar to what I did with my 260.

 

[HRRC Flyer]

Hey Stang,

I thought you said this was going to be a slow project...... I watched your video about removing the sticker and you're right, it came off really nicely. The only issue I have is that fact that if I put that #11 blade down on a hard table like that, it would have rolled off and stuck me somewhere I don't care to mention.......

Keep up the great work.

 

[stangflyer]

Hey Stang,

I thought you said this was going to be a slow project...... I watched your video about removing the sticker and you're right, it came off really nicely. The only issue I have is that fact that if I put that #11 blade down on a hard table like that, it would have rolled off and stuck me somewhere I don't care to mention.......

Keep up the great work.

Thanks.... it's kind of funny you should mention the #11 blade. I was lucky when I shot the video. I can't tell you how many times that darn thing has rolled off and done exactly as you mentioned. Fortunately I have had shoes on. LOL....

 

[Flyrcjoe]

Looking good man! It will be an extraordinary year!

 

[bigblueswope]

Two photos from previous owner, and one of me the day I purchased it. Motor will no doubt be a 3W 275
]

Wow just looking at pics of those checks gives me a headache! I see why they gotta go!

 

[bigblueswope]

@stangflyer I guess that means I will have to create another scheme for RF then Just send me pictures. BTW, I am hoping to create one for the Extra 330SC based on the plane I just finished after I get done with the Purple Edge scheme. I have it about 50% done and have been flying it on my machine at home and it is really cool to be flying on the sim with one of your own planes

@thrumma,

What program are you using to create schemes for RF?

 

[bigblueswope]

Stang,
When reapplying the vinyl, what bonds it to the covering?

How do you get it to stick again?

 

[ericb]

The stick stays on the back of the vinyl.