3D Viper 120cc ARF is HERE!!!!!

[Terryscustom]

This is a half hour video, hopefully gives some insight on how easy this really is. Typically takes about 10 minutes per wing after you've done a couple. Take your time, you will be rewarded with extra battery life, longer servo life and many other benefits.

 

[mnfatboy]

@Terryscustom great videos! The servo matching video was very helpful. Thanks for taking the time to share your knowledge.

 

[js-rc]

That was really great & thanks for making that video !! Now, I just need to know how you plug in the amp meter ? Do you use a Y harness between the RX & servos ?
Thanks again, John !!

 

[Terryscustom]

That was really great & thanks for making that video !! Now, I just need to know how you plug in the amp meter ? Do you use a Y harness between the RX & servos ?
Thanks again, John !!

Amp meter needs to be in-line, so it plugs into the RX and the other wire from the amp meter goes into the servo lead.

 

[js-rc]

Oh, ok. All I have is the volt meter & it only has 1 wire.
Thanks , John !!

 

[Terryscustom]

Oh, ok. All I have is the volt meter & it only has 1 wire.
Thanks , John !!

Won't work, get the Hangar-9 inline amp meter: https://www.google.com/search?q=HAN...id=chrome&es_sm=93&ie=UTF-8#q=hangar+9+han172

 

[js-rc]

Won't work, get the Hangar-9 inline amp meter: https://www.google.com/search?q=HAN...id=chrome&es_sm=93&ie=UTF-8#q=hangar+9+han172

Thanks again Terry, I just found it & ordered it !!

 

[Terryscustom]

The video's got kinda spread out so I wanted to re-post them all together. Many of them are basic but I tried to include as many little tips in there as possible that apply to ALL airplanes. Thanks everyone for the comments, etc.

 

[Terryscustom]

 

[Jetpainter]

Great work Terry! The only thing we need now is a better looking teacher.