• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Tseres

    Thursday May 15 Joe Nall 2015

    Some more. They are not in order.
  2. Tseres

    Thursday May 15 Joe Nall 2015

    Some more.
  3. Tseres

    Thursday May 15 Joe Nall 2015

    I cant find a place to dump all my Joe Nall pictures so I chose this thread just because after Thursday I didn't take any pictures. Most of the pictures are of the PAU Guys cause that's who I hung out with all week. The reason I have so many pictures of the Red PAU Edge is because its mine and...
  4. Tseres

    36% PAU Edge 540T

    That's the bag I'm using for mine.
  5. Tseres

    Brand New PAU........Viper-ST Announced!!!!!!!!

    Not really. Just go for the Viper. :)
  6. Tseres

    3D 73" AJ Laser 230Z

    Sorry it took so long. I didn't get the pane out of the trailer till this afternoon. The ball end of the link is a 2.0 mm screw. I think that is what your looking for to know what size servo arms to get. This is the size screw that goes through the servo arm. Incase anyone wants to know the...
  7. Tseres

    Brand New PAU........Viper-ST Announced!!!!!!!!

    HA Ha. Are you saying I can't fly like that? You're right. :)
  8. Tseres

    Brand New PAU........Viper-ST Announced!!!!!!!!

    Terry. It was great hang ing with You and Lori. I didn't get to fly the Viper cause Herve was very choosy as to who he let fly it. That's OK cause I'll get one of my own when it's released and I won't let him fly it. :)
  9. Tseres

    3D 73" AJ Laser 230Z

    I'll check for you later on today Jake. I didn't pay attention to the size. I do know it's metric.
  10. Tseres

    3D 73" AJ Laser 230Z

    I'm back from Nall. AJ brought me a canopy and I mounted it. I also put 2 4-40 screws in there to help hold the canopy. Have the plane fixed up and ready to go again. Had transmitter issues so I put my Spectrum in there. I'll have it up in the air before the week is up. :)
  11. Tseres

    3D 73" AJ Laser 230Z

    No problem Bunky. Your not stepping on my toes. Info is info. I didn't know about them myself... Post some pictures and info when you can.
  12. Tseres

    3D 73" AJ Laser 230Z

    I use a belt sander and a round file and a half round file. Then sand the edge with some emery cloth. I make a template from poster board to fit around the prop I'm using then Transfer the cutout from the template to the spinner. I get close with the belt sander and finish it off with the files...
  13. Tseres

    3D 73" AJ Laser 230Z

    Got the plane finished up and headed out to the field at 2:30pm. Had my Friends Bob and Perry meet me there. Tom Jr. Also showed up a little later. The Engine fired right up at home and didn't need much tweaking. The plane looked great and flew great for about 43 seconds. That's when the...
  14. Tseres

    3D 73" AJ Laser 230Z

    It's been a long day. Today I cut the spinner for the 20-9 Falcon Prop. Remounted the pin Switch cause I had to make a plate for it. Mounted the wheel pants and the Wheels. Mounted the IBEC. Finished cutting out the cowl. Pre-balanced the plane to see where the batteries would end up. The...
  15. Tseres

    3D 73" AJ Laser 230Z

    Murphy's Law is still working on me. I forgot to order a prop drill Jig for the DA-35. The DLE drill jig does not fit the DA. If I wait for the drill jig to come in then I still couldn't fly the plane tomorrow so I took the prop washer and made my own Drill Jig. I used the DA-50 Jig and added...
  16. Tseres

    3D 73" AJ Laser 230Z

    Thanks Chris. I have enough for now but I will remember that in the fall when I'm gathering parts for winter builds and spring tune ups.
  17. Tseres

    3D 73" AJ Laser 230Z

    My goal was to maiden the Laser on Saturday. I may not meet that goal but it will be close... All the time consuming things are finished. Made up the choke bracket and linkage. This is the way I like to do the linkage cause it's easy for me to reach and be able to see if the choke is on or off...
  18. Tseres

    3D 73" AJ Laser 230Z

    Todays weather dictated that I work on the plane. Finished up the linkage on the Elevator Servos. Then I mounted the throttle servo. I didn't use the hole in the motor box where most people would mount it. I just have a thing about not mounting any servos in the engine compartment. I continued...
  19. Tseres

    3D 73" AJ Laser 230Z

    Was a great day except for one thing. I ordered 4-40 tapped Servo Arms from SWB. The problem is that the Ball links you get in the kit are metric and to small. Had to run to the LHS to get some Dubros. With a few modifications like using 2-56 ball links and switching out the ball from a 4-40...
  20. Tseres

    Brand New PAU........Viper-ST Announced!!!!!!!!

    Woke up in the middle of the night and couldn't go back to sleep cause I was wondering if you had the videos up. I will wonder no more. Nice Job Everyone!!! I had this written around 4am... I was so sleepy that I forgot to push the post button... Better late then never.
Top