• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. tylerzx9r

    IMAC Extreme Flight 78" Extra

    Nice Work! Thanks for the tip on cowl mounting!
  2. tylerzx9r

    3D Viper ST build continued part 2

    Sanded, and ready to glue canopy on.
  3. tylerzx9r

    Extreme Flight Edge 88"

    Another cool looking plane for your fleet! Nice Eric!
  4. tylerzx9r

    3D Yak rebuild

    Nice Scheme!
  5. tylerzx9r

    104 Slick Elevator issue

    I experienced this on an ARF build we just did, We were able to use a straight edge on the trailing edge to make sure both halves were on the same level, then tape the counter balance so it lined up, then using a heat gun, shrinking the covering and it then lined up and counter balances were...
  6. tylerzx9r

    3D Viper ST build continued part 2

    Next I will sand with 180, final with 320 and glue on canopy for front edge to be worked before priming.
  7. tylerzx9r

    3D Viper ST build continued part 2

    After talking with TerryCustom, we decided to Ca the edge and get my glazing done for pinholes.
  8. tylerzx9r

    3D Fibertech Hyperlite Slick 540 Build Thread

    Ready to final trim canopy and glue on, then minor filler work for priming, and cowl is ready for primer also.
  9. tylerzx9r

    OMP Yak 55M 60" Video

    Looks Cool!
  10. tylerzx9r

    3D BH Design 50% Edge 540

    I'm impressed, and watching....... is it here yet?
  11. tylerzx9r

    Scale 50% Dalotel 165

    What happens if you heat the wire?
  12. tylerzx9r

    Glassing and Painting techniques

    About the Glass, I Glass before gluing the canopy, feather edge the front of the canopy in with filler then prime. You end up with a slight hump that can barely be seen unless close up when painted. As far as the paint line, use fine line tape, get the desired look on one side- then try and...
  13. tylerzx9r

    3D Fibertech Hyperlite Slick 540 Build Thread

    Your doing amazing! Like the options of what saws to use, because I do not have a band saw deep enough either.
  14. tylerzx9r

    Scale 50% Christen Eagle full scale exclusiv-kit

    Still in amazement! Really like the thread! Keep the pictures and info coming please!
  15. tylerzx9r

    GiantScaleNews is PROUD to Welcome Reza Gholamipour!!

    I agree on the 100-120cc airframes. They seem to be most popular currently, I myself am wondering about some transmitter comparisons. I currently fly Futaba, but am discouraged that they do not offer a high voltage input receiver without using s-bus. I recently asked our fellow members for...
  16. tylerzx9r

    3D Shop Construction

    Great Idea!
  17. tylerzx9r

    GiantScaleNews is PROUD to Welcome Reza Gholamipour!!

    Glad to see and hear this! Welcome Reza! I have been wondering about this sort of experience for a long time! I get upset (as everyone does) when a product doesn't work for me, but get more uncomfortable when people take to bashing a or slamming the product itself ( I am not talking about...
  18. tylerzx9r

    3D Shop Construction

    Agreed on Spray Foam, but urge you to choose CLOSED CELL FOAM, open cell foam is a better sound insulator but acts like a sink sponge if ever getting wet (snow or rain on any minor leak) Closed cell repels water! I have had several dealings with Conklin brand foams and would never use anything...
  19. tylerzx9r

    Formation Flying

    All filled with Awesome!
  20. tylerzx9r

    3D Fibertech Hyperlite Slick 540 Build Thread

    Looks like the same package I received for the Viper-ST, it's got to be a good combo!
Top