• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Tseres

    Scale Balsa USA Camel F1

    Finished joining the Right win together. This is going to work great. Glad I decided to make it a 3 piece wing.
  2. Tseres

    PAU 30% Sukhoi SU-26

    Did a little multitasking today. Started making the baffles for the Suk. I spliced and laminated some 1/16 X 3 sheeting to close off the front of the cowl. Then I covered one side with .o75 fiberglass cloth that I had left over from the P47. Use 30 minute epoxy for the resin thinned with some...
  3. Tseres

    Scale Balsa USA Camel F1

    I had a little bit of time this evening so I had to put my mind at ease... I wasn't sure if the double tube is going to work because If you get it out of parallel then the two wing halves won't slide together. As it turned out it works. The wing tube sockets fit real tight between the spars...
  4. Tseres

    PAU 30% Sukhoi SU-26

    Thanks Guys. Glad you guys are looking in. Yesterday I didn't take any pictures inside the wing of the bridge I was talking about. These pictures should show you what I was talking about... It's simple light and it works.
  5. Tseres

    PAU 30% Sukhoi SU-26

    Here is another little thing I developed over the years. I call it the bridge. It's simply a way to keep the servo wire from falling back into the wing. However you can still remove the wire without breaking the bridge off. The opening is big enough to push the servo connector through. On a...
  6. Tseres

    Scale Balsa USA Camel F1

    Got my wing spar tubes in. I have some more work to do on the Sukhoi. I'll get back on the Camel as soon as I can.
  7. Tseres

    PAU 30% Sukhoi SU-26

    I started making up the servo extensions. Also programed the elevator and the ruder. getting 45* up and 47* down. I did that on purpose. the ruder is 45 and 45. I moved the antenna location for the receiver also. I have one antenna pointing down instead of up. I like it better that way cause...
  8. Tseres

    Welcome to our new home for forum support...PAU

    Merry Christmas. May Christmas bring peace and happiness to your home. And a PAU plane under your tree is not bad either.
  9. Tseres

    PAU 30% Sukhoi SU-26

    Merry Christmas.
  10. Tseres

    Scale Balsa USA Camel F1

    Mary Christmas from My Family to Yours.
  11. Tseres

    PAU 30% Sukhoi SU-26

    Things are on hold for a couple of days. Merry Christmas Everyone.
  12. Tseres

    Welcome to our new home for forum support...PAU

    Sorry about the chaos in the warehouse.I know you'll get it worked out. Merry Christmas everyone.
  13. Tseres

    PAU 30% Sukhoi SU-26

    How to Cut a Fiberglass No Limitz Spinner. This will give you an idea of how I do it. I learned how to do this from my friend Chris who you may know as Cspaced on the threads. The first step is to make a paper. I use poster board from the dollar store. It's important to establish the screw...
  14. Tseres

    PAU 30% Sukhoi SU-26

    Me Agree... That'll happen when I get the rest of the bling from B&E. Don't know what I want yet.
  15. Tseres

    PAU 30% Sukhoi SU-26

    Thanks. It's a solid and smooth setup. You can take it apart and put it back together and end up in the same spot every time.
  16. Tseres

    PAU 30% Sukhoi SU-26

    Last night I pinned the firewall. I actually used some flathead #4 X 1 screws. I predrilled and drove in the screws then took the screws out and put a drop of medium CA and put the screws back in. Then I put a coat of 30min epoxy thinned with rubbing alcohol to fuel proof the engine compartment...
  17. Tseres

    PAU 30% Sukhoi SU-26

    Appreciate your comment and thanks for looking in.
  18. Tseres

    PAU 30% Sukhoi SU-26

    Thanks. There are to many variations to make it profitable. Love your Avatar.
  19. Tseres

    PAU 30% Sukhoi SU-26

    Here is the Choke setup. All my planes with a cowl have some kind of a mechanical Choke setup that gives me access from the front. I don't like Servo chokes for many reasons but mostly cause I can't see if they are closed or open. Twins are easy they come out the bottom and don't need a bracket...
  20. Tseres

    PAU 30% Sukhoi SU-26

    It's to close to Christmas so I'm busy doing other things. I do get a half hour here and there to work on the plane. Been messing with a choke bracket but the one I made didn't work. It was to close to the carb choke arm. I'll have to make one like I do for the DA-60 with a kick out. I'll get...
Top