• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. T

    Prop sizing

    What would be the expected performance difference between a 23x10 and a 22x12? I know there are variables but in general terms.
  2. T

    Anyone running a Evolution 33cc

    Looking at buying a plane that has a evolution 33 on it, can I get your guys thoughts on this motor good or bad?
  3. T

    Sport Cappy cuts/builds an old school Ultra Hots with a few mods.

    Someone needs to make a DXF of the files so they can get laser cut.
  4. T

    Shout Box

    I like it!
  5. T

    What Canopy at the field?

    What Canopy do you guys use at the field? I like caravan brand, but I wonder about something bigger for Joe nail.
  6. T

    Extreme Flight 100"/105" Slick 580 EXP!!!

    Anyone flying it or have any thoughts on motor selection and servos?
  7. T

    Help! Setting up 4 aileron servos 37% edge

    thanks big help!
  8. T

    Discussion Work bench or stand questions 100cc

    Thanks guys this is one great site love the fast replies.
  9. T

    Woah

    Love the new look!
  10. T

    Potenza question

    I have been flying the Mamba with the Potenza gyro setup for months. I have been very impressed with the combo. The airplane is incredible and the Potenza really helps stop wing rock. And yes I am using the shark's teeth. However today at the flying field I experienced quite a scare. When I...
  11. T

    Sport Building table/board

    I searched the forums for building tables and building tables but I didn't find anything. Maybe some of the master builder's can discuss their building table and how they are made and how they know they are made straight and level. If someone were going to build a big Carden or EHMW or Dalton...
  12. T

    Help! Setting up 4 aileron servos 37% edge

    Hey guys, am having a problem setting up my servos on the ailerons , I did set it up as 4 aileron servos 2 per wing...can anyone suggest the procedure on how to center them, and how to use the sub trim so the servos work together ...servos are blue birds.. Radio is dx 18 Thanks
  13. T

    Discussion Work bench or stand questions 100cc

    What do you use for a stand or a bench for a 100 cc plane. I have had back surgery so to low makes it tuff to work on and to high can't get at it. Let me hear your thought or pics
  14. T

    Pitts from Russia

    maybe you could post it on this site.
  15. T

    What indoor plane is everyone flying

    Wondering what most people are flying these days wanting to get a new indoor plane.
  16. T

    Minimum weight for F3P entry level class

    F3P or Indoor Aerobatics has started as a class, where young pilots could show their skills without spending a fortune or hours and hours on building their models. This has changed significantly over the past few years and the number of participants ist shrinking. and so is the availability for...
  17. T

    Discussion electric for pilot 42% edge 540

    Would it be possible to find an electric motor that would fly this plane for a sport flier only.
  18. T

    Discussion electric motor compared to 100 to 120cc gas

    I am interested in building a pilot 35% extra. Pilot recommends a gas motor from 100cc to 120cc. What would be an electric motor equivalent to these gas motors.
  19. T

    Help! Fromeco 5200 LION capacity

    I was wondering what you should see on a battery cycle of a healthy Fromeco 7.4 volt 5200 LION battery pack? Basically, if you charge it and discharge it with a cycler, what should come out and what should go in? I am using 7 volts cut off and 6 volt cut off as the basis. .5 amp discharge.
  20. T

    Futaba GYA 430 vs. GYA 440

    Does anyone know the difference (besides price, lol) between the Futaba GYA430 and GYA440? I have read the manual for the GYA430 but can't finds one for the GYA440.
Top