• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bunky.F.Knuckle

    New t-shirt design.....black!

    Please any color but black and red. Grey, Orange and blue would be awesome! It is a sharp looking shirt! Nice job, Mr. Designer!
  2. Bunky.F.Knuckle

    Sleepy got a new Side Job......HEAVY MACHINERY!

    Too much dust.
  3. Bunky.F.Knuckle

    Limitless Aero

    He is laying low right now. His domain has expired. Said if anyone needs anything, to email him.
  4. Bunky.F.Knuckle

    Airwild 35% Edge 540T

    It is 2 different companies. Sadly, Wild Hare is out of business. Had some nice flying airplanes.
  5. Bunky.F.Knuckle

    Airwild 35% Edge 540T

    Careful component selection, and going as minimalistic in yours set up will yield some lighter weight results. I bought a carbon tube for my MX2, it takes the aluminum tube weight in half! 12 oz on the CG works great! Atleast it will when it goes back together.
  6. Bunky.F.Knuckle

    Anyone ever seen this?

    You don't need a power board on a 30cc airframe. Remove it and then rebind after you get it all set up. The twitching will go away.
  7. Bunky.F.Knuckle

    3D BH Design 50% Edge 540

    I talked with the infamous "Buttface" yesterday. We talked alot about ZDZ stuff. He said that ZDZ is to be announcing a US distributor soon. He did keep mentioning Chief, to ZDZ as the distributor. AMR is a great resaler too. I did get a message back on the whereabouts of my 112...
  8. Bunky.F.Knuckle

    Rant......Pre assembled fuel tanks.

    Its not bashing, if its the truth. Also, we are just stating opinions as well. If someone has good luck with a product that is sketchy, I will wish them good luck. But to be cautious of possible problems.
  9. Bunky.F.Knuckle

    GP 123

    Use compressed air if at all possible.
  10. Bunky.F.Knuckle

    Airwild 35% Edge 540T

    Beware...... It is a 30# slug with a DA 100 on it. Flew decent, but needs about 3# removed somehow. Hell of a buy, I will say that!
  11. Bunky.F.Knuckle

    Airtronics Users

    I would fly ATX if I wasnt already flying JR DMSS. The idea behind the remotes is pretty simple...... Adds an extra Rx into the airplane without the added cost. But, they have to be positioned accordingly to get the best signal.
  12. Bunky.F.Knuckle

    GP 123

    Pull the carb apart and clean it. Yes, I realize it is new, and shouldnt need taken apart. But I sent a BME 116 in for service for poor running. Tom went thru it, and however it was better, still wasnt perfect. I tried everything except cleaning the carb at the field. Came home and cleaned...
  13. Bunky.F.Knuckle

    IMAC Delro Raven 3.1M build

    Mostly designed that way. On my MX2 Compy, I plan on installing rudder servos in the tail, probably 4" from the tail post. That is, when I get back to moving around. There will be a nice healthy size backer inside the fuse for the servos. :)
  14. Bunky.F.Knuckle

    Tech-aero IBEC question

    IBEC has a built in regulator. That could be the issue. But remove the IBEC and try a 6V pack and see if that cures the woes. I regulated a new 3W IIS twin ignition. Wouldn't run right. Stuck a 4.8V pack on it, and it turned up harder than I ever expected a 106 to turn! I ditched the...
  15. Bunky.F.Knuckle

    3D Shop Construction

    Don't be in a hurry to finish it. We helped a buddy build his pole barn a few year back. We were long on 3 sides by 4". Had all the poles set and concrete in the holes. Found that error before we started putting the sides on. Had everything set at 30'x48'. It is a 29'8" x 47'8" barn. So...
  16. Bunky.F.Knuckle

    Stihl HP Ultra Giveaway Contest! Reza made me do it.

    Oh well. Sthil is all I use. :)
  17. Bunky.F.Knuckle

    DA-70

    Why not move the ball link to the inside?
  18. Bunky.F.Knuckle

    Stihl HP Ultra Giveaway Contest! Reza made me do it.

    No he is not. I didn't get a chance. :)
  19. Bunky.F.Knuckle

    3D BH Design 50% Edge 540

    If you think balancing with a 176 was gonna be a headache, then balancing with a 6 holer would be intense migraine. Going from WAY tail heavy to wickedly nose heavy. 4 more servos in the tail wouldn't help much either.
  20. Bunky.F.Knuckle

    Rant......Pre assembled fuel tanks.

    I have never used an expensive cap. Never will either.
Top