• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. thurmma

    Booma RC Intellimatch servo matching

    I just sent BoomaRC an email letting them know about the site and that people are asking questions on configuration and it would be good to hear from the company that developed the product.
  2. thurmma

    Booma RC Intellimatch servo matching

    I was looking through the installation instructions and they do recommend getting the mechanical side as close as possible before installing the matchboxes. I believe I saw somewhere in the instructions that there was a 5%+- tolerance, which is a pretty good bit of tolerance. We shall see what...
  3. thurmma

    Booma RC Intellimatch servo matching

    Thanks for the info jaybird. Mine will be here today and will be doing the install tonight unless the weather holds out, then I will be taking my daughter to see Foreigner :) It is an outdoor venue and at this time we have about 50% chance of T-storms tonight.
  4. thurmma

    Need some help

    Didn't think about that :) Thanks!
  5. thurmma

    Need some help

    They are supposed to be here on Friday :) You can order them from vital-rc.com
  6. thurmma

    RC Airplane Memes

    Love it!
  7. thurmma

    Good prop drill bit

    I use the Dewalt titanium bits with the drill jig and a drill press. I drill from the back side first, then drill from the front side just to make sure everything is true. Every now and then I will feel a little bit of pressure on the redrill from the front side, but not very often. Also, make...
  8. thurmma

    Need some help

    Went out last night for a couple of test flights. CG is about as close to dead on as it can get. 45 degree upline inverted has a very slight drop of the nose. The lateral balance was not providing consistent results. The was some gusty winds and one time it would be wings level the next it would...
  9. thurmma

    Official Thread....Show Us Your NAD's!!

    We would NEVER do that to you :funny-laughing-smil
  10. thurmma

    Booma RC Intellimatch servo matching

    I will be replacing JR matchboxes in a 3 servo per wing setup. I will hook up my quad current meter before pulling the old boxes out a video going from full throw to full throw and then compare it to the new setup the same way. If it works as advertised it should be greatly reduced current draw...
  11. thurmma

    Need some help

    It has been hotter than haties here so I have been working on fine tuning the trim on the plane. Found that one of the elevators was not throwing the same as the other :( I have that straightened out now :) Will be testing that out in the next day or two to see if that helped the fading away...
  12. thurmma

    Which Radio System Is Best?

    First radio was an FM Airtronics, then had some Hitech 4 channel radios, then a Futaba 7 channel 72mhz and when I went to 2.4 I went back to Airtronics for the programming simplicity and have had both the RDS 8000 and the 10G. The 10G is an awesome radio in my books. Easier to program then the...
  13. thurmma

    Booma RC Intellimatch servo matching

    Just wondering if anyone has or is currently using the auto matching match boxes from BoomaRC? I have 2 on their way for my 42% and if they work as advertised I should get some more battery life and less wear and tear on the servo gears. If nobody is using them, I will try to shoot a...
  14. thurmma

    Smaller trailers for 40% + sized Giants!

    Nice setup! I would love to do something like that and pull it with our Terrain, but my trailer also doubles for transporting my lawnmower and storage for my planes :) I have a 42% Edge, 36% Edge, 70" Yak and a 48" Edge, so the trailer works great to keep the planes in when I need to use my...
  15. thurmma

    First Contest at GiantScaleNews.com!! Desert Aircraft Engine Giveaway!!

    That is the NEW math :)
  16. thurmma

    2014 Chattanooga 3D Jam - August 22, 23 and 24

    Awesome event coverage! It is nice to see what is happening in parts of the country that I can't make it to :)
  17. thurmma

    Black Hills / GSN Huckfest 2014 Official picture and video thread!!!

    Great pictures and videos! Makes you feel like you were there :)
  18. thurmma

    Is this the first GSN Themed Plane?

    Awesome paint job pawnshopmike!
  19. thurmma

    2014 Chattanooga 3D Jam - August 22, 23 and 24

    Get it out of the way early I always say! Don't look to bad. Duck tape and epoxy! It will live again :)
  20. thurmma

    Need some help

    Thank you for the info on scribing :) I think the bug is already setting in. I find myself flying the sequences more often when I am out than just burning holes in the sky. I like the challenge of getting it right and figuring out what I am doing wrong. Hope to be ready for the Sherman event...
Top