• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Stuka Ju87 100in wingspan

    Still green where you live, I'm looking at snow one day followed by rain the next and cycle keeps repeating. Pretty mild winter so far, could be 10 below!
  2. TonyHallo

    Scale Don Smith P-51 Mustang

    Those joiners look like Byron wing joiners. A lot of heavy iron was flying around in the sky on those joiners back in the day. I see that Sig still offers them as well https://sigmfg.com/collections/hardware/products/sig-giant-scale-aluminum-wing-joiner
  3. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Thanks, good reading. If I understand what was said about the cowl, sounds like you will be removing the ring and sanding the rear edge to make if fit? Yours looks real good, flows with the fuselage, wonder what it will look like when the front is raised 1"? You will need to remove quite a...
  4. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Where did you the article from the designer? Have a link?
  5. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    I assume the bulkhead is the plate the engine is bolted to? AKA Firewall. I would position it to avoid the spacer if possible. That's me!
  6. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    What other engines were you considering?
  7. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Are you going to glue the ring to the cowl? Glad to see you're back on this build, have a kit on the shelf and want to know how it ends!
  8. TonyHallo

    Mini lathe (and mill) discussion.

    Made this power feed for the mill from a windshield wiper motor some time ago, no speed control. Found this 60 amp PWM motor speed control on EBAY. Now have speed control between 25% to 100%. Surface finish is much better. Motor will stall less than 25% output.
  9. TonyHallo

    Scale Don Smith P-51 Mustang

    Weight, just like real life, easy on, hard to get off!
  10. TonyHallo

    Scale Don Smith P-51 Mustang

    Indeed!
  11. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Finally got the saw horses back in the shop from the remodeling project so I can flip the fuselage over for a photo. The pulley is a little larger now and relocated on the elevator rather than the stab. Works much better. Nicked the cables while enlarging the exit hole so I need to make new...
  12. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    The vertical cable is for the trim indication in the cabin.
  13. TonyHallo

    Scale Stuka Ju87 100in wingspan

    Still a fast build, first post 10/8/20!
  14. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Some food for thought.
  15. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Put a jackscrew on the front mount hooked to a multi-turn servo.
  16. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I'm too cheap!!!
  17. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Moved the pulley to elevator leading edge, works much better, still need to do some more work but I'm sure on the right tract now. Have to sneak this work in between the remodel work, still have 900 sq ft of flooring to install, plus painting. Getting tried of cleaning paint brushes.
  18. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    That's looking real good. What is your plan for the front connector?
  19. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    You bet, very nice!
  20. TonyHallo

    Yippee! What the postman brought

    Darn, I wished the postman brought me something fun, but he brought me a flooring stapler for my remodeling project, rats!!!! Another two weeks and I might get back to the Champ.
Top