• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. stangflyer

    DLE 61

    My experience with DLE is they are usually accurate with their measurements. If you're thinking it may be too long and it is going to be a fight, a couple of suggestions. The first one you won't like. Move the firewall back. Or what I would do is open a carb. recess hole in the firewall and use...
  2. stangflyer

    3D 50% cap 232

    Way to go Joe. A huge payoff in the most "GIANT SCALE" way....
  3. stangflyer

    Real Flight 7.5...

    Always the best times with all the gang..... So much fun. Thanks again.....
  4. stangflyer

    3D BH Design 50% Edge 540

    That's what I used. Instead of the "All Thread" rod, (which is very weak) I used hardened steel threaded rod. Oh, so what's the difference? I found the difference. Zero flex with the hardened steel. Threaded the wooden dowel and since all the rest of the hardware is blue, I slapped a coat of...
  5. stangflyer

    Sport Dalotel Junior

    Looking good Roger. I can't wait to see the 50% done. But hey, a junior is good too right?:way_to_go:
  6. stangflyer

    3D BH Design 50% Edge 540

    I was actually thinking about that too Chris. I just did some measuring. I was incorrect on the size of the threaded rod. It is actually 4mm which is slightly larger as you know, than the 10-32. I don't think 10-32 really is sufficient for something this size is it? I think I am going to D&B to...
  7. stangflyer

    The I'm going out flying thread 2016

    Weather sucks here too. Hmm..... I am thinking we could still fly. Maybe a little GSN Huckfest a little later with RF????
  8. stangflyer

    3D BH Design 50% Edge 540

    Wow....Didn't even think of them. Thanks guys.
  9. stangflyer

    3D BH Design 50% Edge 540

    If I am able to make it and I bring a plane, it will be the only one I bring. So ya... LOL
  10. stangflyer

    3D BH Design 50% Edge 540

    Thanks... You know? My shop has all the comforts of home. :laughing: Thank you. It really is coming together. Getting really excited.
  11. stangflyer

    Hanger 9 Sukhoi (OLD?)

    Any luck on those figures?
  12. stangflyer

    3D Viper-ST 100-120cc scratch build......it continues!

    Not much different here. Cold as you know what. Wind blowing the shingles off the roof tops. And to think last week it was sunny, 60 degrees and nearly no wind.
  13. stangflyer

    ID needed

    Wow....!!! Really? It was a joke. It just so happens I've been riding bad ass bikes for years. Some of my best friends are some of the roudiest bikers you will ever meet. And damn nice people too. Topic is: Ya don't mess with our r/c. Just like you don't mess with another bikers bike. That is all.
  14. stangflyer

    3D BH Design 50% Edge 540

    Thanks so much. I appreciate it. Gotta hand it to you Mark...without the GSN logos, I probably wouldn't have made such a big deal about this plane. But now, I want it as impressive as the graphics will be on the wings.
  15. stangflyer

    3D BH Design 50% Edge 540

    I liked it so I revised it. Thanks @Pistolera for the idea.:way_to_go:
  16. stangflyer

    3D BH Design 50% Edge 540

    Will do. Thanks...
  17. stangflyer

    3D BH Design 50% Edge 540

    While I am thinking about it, in attempting to remove the old rudder control horn assembly, the 10/32 threaded rod going through the rudder broke off on both sides. Apparently it was epoxied in. I had to drill out the old rod and 3/4" wooden dowl and set a new one in place. Now I am in search of...
  18. stangflyer

    3D BH Design 50% Edge 540

    wig mannequins! Found them. And cheap too!!! :yesss: Except I think I want the "FULL" bodied "BUSTY" female. :laughing:
  19. stangflyer

    3D BH Design 50% Edge 540

    Hey...I LIKE THAT. Now why didn't I think of something clever like this? LOL
  20. stangflyer

    3D BH Design 50% Edge 540

    No kidding?? Well, I really like Cap't Jack. I will look for one. Anything in particular I am looking for? Brand? Listing? Thanks Earle.
Top