• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bhughes

    Trout farm flyers

    My new airframe I like it. Part one.
  2. Bhughes

    3D 92" aeroplus edge from pro-rc

    No that's one thing I've never done with a motor. You just hook a fish scale to the plane? Here's part one of today's first full flight. This edge is amazing
  3. Bhughes

    3D 92" aeroplus edge from pro-rc

    The verdict isn't out on it yet. I'm the only guy posting videos let alone talking about flying it so far. Lorne did a flight tonight and I got one in too. What a beast needs tail weight lol. We taped a aa batt to the rudder still needs more. Two part video tonight. Motor came Alive being 14c...
  4. Bhughes

    Trout farm flyers

    Was to windy lol landed right away
  5. Bhughes

    3D 92" aeroplus edge from pro-rc

    That's the hype pipe for you lol. Only like 160$ Canadian for one. http://www.pro-rc.ca/pro-rc-hype-pipe-60-120cc-tune-pipe/
  6. Bhughes

    3D 92" aeroplus edge from pro-rc

  7. Bhughes

    3D 92" aeroplus edge from pro-rc

    Short flight video later tonight. They have some work to do not gp quality yet. But runs nice.
  8. Bhughes

    3D 92" aeroplus edge from pro-rc

    Engine ran fine plenty of pull it was only a short flight didn't get to play with it much lol.
  9. Bhughes

    3D 92" aeroplus edge from pro-rc

    Well it flew wow does it rip. Short 2 min video later cut it short wind picked up to 40k as a storm rolled in lol. Still in one piece. 6900 24/9 only plus 4c out here today.
  10. Bhughes

    3D 92" aeroplus edge from pro-rc

    Well she done except to throw Lorne's Rx in. We're doing jr for the brain because Lorne always leaves it at the farm so we can both fly it. Not bad on the motor mounting only a mill or two off lol. She's big my 3dhs 92" edge mounts in the trailer won't work the rudder hits the roof. Maiden today...
  11. Bhughes

    3D 92" aeroplus edge from pro-rc

    . Lorne got sick of losing wheels coulers and axels so this is his new method I like it. M5 bolt spacer regular nut two washers and a Teflon locking nut. Saves buying white rose axels. For larger planes use an m6. Now my favorited way to do an axle
  12. Bhughes

    3D 92" aeroplus edge from pro-rc

    Well got the fuel tank done it's a kuza tank take note these tanks were out before extreme flights "new" tanks see a resemblance lol. Elevators on. Batts installed. Fuel dot. Ign mounted with a nice ign holder I won at the great Canadian Huckfest . Throttle done. Finally get to use the batt...
  13. Bhughes

    3D 92" aeroplus edge from pro-rc

    Well pinned the exhaust and glued a mount in. All I could manage after a 14 hour day and parenting now lol. An es 55 comp mount worked for the hype pipe perfect. A little but of trimming and it slide inside the bracing of the tunnel like a glove first shot.
  14. Bhughes

    3D 92" aeroplus edge from pro-rc

    Yep machined aluminum
  15. Bhughes

    3D 92" aeroplus edge from pro-rc

    The small ones are flimsy only meant for elec. can't run them on 100cc
  16. Bhughes

    3D 92" aeroplus edge from pro-rc

    Their called fly wheels http://www.pro-rc.ca/new-flywheelz-8-spoke-aluminum-wheels/ Yes there was a click that would settle out and go away when you come back to an idle it was weird but hey it was free lol
  17. Bhughes

    3D 92" aeroplus edge from pro-rc

    after the little one went to bed I got the motor mounted and header cut. Dry fit the pipe. Still have to pin it and glue in a mount. Bit of work to shoe horn the pipe in, but do it carefully and it works. You can see what I had to cut out to make the pipe fit
  18. Bhughes

    3D 92" aeroplus edge from pro-rc

    Got home before the wife today and glued the rudder hinges in the new fuse(I had wings and elev from another plane not mine. And got a new fuse. Normally the rudder is glued already and you just have to drop the pin in) drilled the motor mounts out. And was checking to see if I have to flip the...
  19. Bhughes

    3D 92" aeroplus edge from pro-rc

    Got the servos in the ailerons and elevators tonight. Using some bling secraft ball links. Take note that their fuses come with the covering cut out for your servo wires anti rotation pins and wing bolts. The fire wall already has a couple cut outs for throttle linkage and fuel tubing, don't...
  20. Bhughes

    3D 92" aeroplus edge from pro-rc

    Most of what I need
Top